[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (271.7, 106.1) = 5 34 35.95 21 48 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 478.3 +/- 33.8
  Background counts = 110.2
  Rate = 0.04 +/- 0.002

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 14.08'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Mon Feb 20 19:05:59 2012] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.909
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 13.47"
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 4560.590000, observed total counts = 4557.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 28 = 0.939871 pixels
[Tue Feb 21 07:27:20 2012] Warning, changing simple spatial fit ID from 51 to 49
[Tue Feb 21 07:27:20 2012] 4694.754500 total counts/ 4595.150000 bgd. counts: snr = 1.469363
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.939871 pixels
  Position = (270.9, 105.6) = 5 34 36.20 21 48 17.1
  Extent = 6.1 (4.2-8.9)", rotation angle = 0
  Source counts = 99.6 +/- 68.5
  Background counts = 4595.1
  Rate = 0.007 +/- 0.005
  Deleting source due to low Poisson probability