[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (282.1, 125.0) = 5 34 32.69 21 49 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 658.8 +/- 38.8
  Background counts = 133.6
  Rate = 0.05 +/- 0.003

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 12.63'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.893
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.74"
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Feb 21 07:26:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Feb 21 07:26:35 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 5386.170000, observed total counts = 5386.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 25 = 2.284683 pixels
[Tue Feb 21 07:27:20 2012] Warning, changing simple spatial fit ID from 32 to 11
[Tue Feb 21 07:27:20 2012] 4783.310000 total counts/ 3333.970000 bgd. counts: snr = 25.100908
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.284683 pixels
  Position = (280.9, 123.0) = 5 34 33.06 21 49 32.8
  Extent = 21.4 (14.7-25.9)", rotation angle = 0
  Source counts = 1449.3 +/- 69.2
  Background counts = 3334.0
  Rate = 0.1 +/- 0.005
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 2
[Tue Feb 21 22:13:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 21.44"
[Tue Feb 21 22:13:39 2012] source mask rpix=4.9, npix_max = 117, mask sum = 107, frac = 0.908
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 21.44"
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31.csv
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31.csv
[Wed Feb 22 17:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Feb 22 17:00:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Feb 22 17:00:35 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Feb 22 17:01:42 2012] Spatial fit model total counts = 5386.740000, observed total counts = 5386.000000
[Wed Feb 22 17:01:42 2012] Offset between fit and detection position for source 25 = 2.819647 pixels
[Wed Feb 22 17:01:42 2012] Warning, changing simple spatial fit ID from 31 to 11
[Wed Feb 22 17:01:42 2012] 3862.182000 total counts/ 3316.860000 bgd. counts: snr = 9.468680
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.819647 pixels
  Position = (281.8, 125.7) = 5 34 32.78 21 49 44.4
  Extent = 16.1 (12.3-22.2)", rotation angle = 0
  Source counts = 545.3 +/- 62.1
  Background counts = 3316.9
  Rate = 0.04 +/- 0.005
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:22 2012] XMMSAS src. selection expression = ellipse(24469.858000, 10886.374000, 968.478028, 968.478028, 0.000000, X, Y)
[Wed Feb 22 21:58:22 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25_src.reg
[Wed Feb 22 21:58:22 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (226, 70) - (337, 181)
[Wed Feb 22 21:58:22 2012] XMMSAS bgd. selection expression = annulus(24469.858000, 10886.374000, 1614.130046, 3228.260093, X, Y) && !ellipse(24478.485413, 14958.234024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.736633, 14229.391312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24240.063782, 10303.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.705200, 11433.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24391.330000, 12480.572000, 846.184024, 846.184024, 0.000000, X, Y) && !ellipse(24144.055267, 9348.404701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.160000, 13143.274000, 2437.792070, 2437.792070, 0.000000, X, Y) && !ellipse(24393.059845, 13856.362350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23703.826000, 14606.774000, 1114.760032, 1114.760032, 0.000000, X, Y) && !ellipse(24215.312000, 8309.780000, 2246.504065, 2246.504065, 0.000000, X, Y) && !ellipse(24605.799377, 12233.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.992096, 10490.223282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.759766, 9771.465698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.675903, 12141.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.571800, 13267.800000, 1871.960054, 743.520821, 90.936000, X, Y) && !ellipse(23549.806610, 8411.246399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.580994, 13431.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23712.260600, 12791.573200, 1871.960054, 565.832816, 90.333000, X, Y) && !ellipse(23401.215240, 7820.398834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25585.114899, 13563.901581, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:22 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25.gif
[Wed Feb 22 22:53:19 2012] Mean detx,y = (529.79, 13465.49) 
[Wed Feb 22 22:53:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:53:42 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:53:42 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Feb 22 22:53:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Feb 23 06:23:40 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:40 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Feb 23 06:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:45 2012] Using photon index=1.80, rate=0.0402, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src25.arf
[Thu Feb 23 06:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:45 2012] Updating source flux to 1.3e-12
[Thu Feb 23 06:33:04 2012] Flag c found in src. 25 procflags, skipping spectral fitting