[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (276.5, 140.1) = 5 34 34.45 21 50 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 465.7 +/- 37.4
  Background counts = 158.5
  Rate = 0.03 +/- 0.003

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 11.59'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.730
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 12.22"
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 54 centroid is now closest to src. 24
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = -2.806160, observed total counts = 3786.000000
[Tue Feb 21 07:27:20 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 22
[Tue Feb 21 07:27:20 2012] Source is confused with source 24
[Tue Feb 21 07:27:20 2012] Source is confused with source 134
[Tue Feb 21 22:13:39 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Tue Feb 21 22:13:39 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.730
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 12.22"
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51.csv
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51_1.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51.csv
[Wed Feb 22 17:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Wed Feb 22 17:00:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Wed Feb 22 17:00:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Wed Feb 22 17:01:43 2012] Warning, spatial fit 51 centroid is now closest to src. 21
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:26 2012] XMMSAS src. selection expression = ellipse(24003.675903, 12141.573181, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:58:26 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23_src.reg
[Wed Feb 22 21:58:26 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (239, 103) - (314, 178)
[Wed Feb 22 21:58:26 2012] XMMSAS bgd. selection expression = annulus(24003.675903, 12141.573181, 1087.500000, 2175.000000, X, Y) && !ellipse(24478.485413, 14958.234024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.736633, 14229.391312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24712.394000, 15416.098000, 1220.664035, 1220.664035, 0.000000, X, Y) && !ellipse(24240.063782, 10303.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.705200, 11433.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24391.330000, 12480.572000, 846.184024, 846.184024, 0.000000, X, Y) && !ellipse(24144.055267, 9348.404701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.160000, 13143.274000, 2437.792070, 2437.792070, 0.000000, X, Y) && !ellipse(24393.059845, 13856.362350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24469.858000, 10886.374000, 1291.304037, 1291.304037, 0.000000, X, Y) && !ellipse(23703.826000, 14606.774000, 1114.760032, 1114.760032, 0.000000, X, Y) && !ellipse(24215.312000, 8309.780000, 2246.504065, 2246.504065, 0.000000, X, Y) && !ellipse(24605.799377, 12233.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.992096, 10490.223282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.759766, 9771.465698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.571800, 13267.800000, 1871.960054, 743.520821, 90.936000, X, Y) && !ellipse(23869.580994, 13431.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23712.260600, 12791.573200, 1871.960054, 565.832816, 90.333000, X, Y) && !ellipse(25585.114899, 13563.901581, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:26 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23.gif
[Wed Feb 22 23:49:30 2012] Mean detx,y = (90.54, 12220.09) 
[Wed Feb 22 23:49:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 23:49:43 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 23:49:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Feb 22 23:49:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Feb 23 04:15:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 04:15:36 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:41 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:41 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb 23 06:23:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:46 2012] Using photon index=1.80, rate=0.0344, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src23.arf
[Thu Feb 23 06:23:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:46 2012] Updating source flux to 1.3e-12
[Thu Feb 23 06:33:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting