[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (281.2, 164.1) = 5 34 32.97 21 52 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 600.7 +/- 39.1
  Background counts = 213.9
  Rate = 0.09 +/- 0.006

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 9.82'
[Mon Feb 20 19:05:58 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 19:05:58 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Mon Feb 20 19:05:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Mon Feb 20 19:05:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.34"
[Tue Feb 21 07:26:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 21 07:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5.csv
[Tue Feb 21 07:26:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 21 07:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5.csv
[Tue Feb 21 07:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 21 07:26:34 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 5 centroid is now closest to src. 131
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 20
[Tue Feb 21 22:13:39 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Tue Feb 21 22:13:39 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.34"
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Feb 22 17:00:31 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Feb 22 17:00:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 22 17:00:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 22 17:00:34 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Feb 22 17:01:42 2012] Warning, spatial fit 5 centroid is now closest to src. 132
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:19 2012] XMMSAS src. selection expression = ellipse(24418.736633, 14229.391312, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:58:19 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18_src.reg
[Wed Feb 22 21:58:19 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (244, 127) - (319, 202)
[Wed Feb 22 21:58:19 2012] XMMSAS bgd. selection expression = annulus(24418.736633, 14229.391312, 1087.500000, 2175.000000, X, Y) && !ellipse(24478.485413, 14958.234024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24712.394000, 15416.098000, 1220.664035, 1220.664035, 0.000000, X, Y) && !ellipse(24655.551971, 16133.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.773000, 16806.098000, 1667.152048, 456.131213, 5.977000, X, Y) && !ellipse(24222.705200, 11433.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24391.330000, 12480.572000, 846.184024, 846.184024, 0.000000, X, Y) && !ellipse(24400.160000, 13143.274000, 2437.792070, 2437.792070, 0.000000, X, Y) && !ellipse(22104.924000, 17475.917400, 1653.432048, 1653.432048, 0.000000, X, Y) && !ellipse(24393.059845, 13856.362350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24469.858000, 10886.374000, 1291.304037, 1291.304037, 0.000000, X, Y) && !ellipse(23703.826000, 14606.774000, 1114.760032, 1114.760032, 0.000000, X, Y) && !ellipse(24605.799377, 12233.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.675903, 12141.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25500.485840, 16345.801453, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23674.571800, 13267.800000, 1871.960054, 743.520821, 90.936000, X, Y) && !ellipse(23869.580994, 13431.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23712.260600, 12791.573200, 1871.960054, 565.832816, 90.333000, X, Y) && !ellipse(26908.330000, 17433.188800, 1399.400040, 1399.400040, 0.000000, X, Y) && !ellipse(22579.860000, 17552.235000, 1505.464043, 524.140815, 3.248000, X, Y) && !ellipse(25585.114899, 13563.901581, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:19 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18.gif
[Wed Feb 22 22:02:44 2012] Mean detx,y = (352.84, 10138.25) 
[Wed Feb 22 22:02:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:03:07 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:03:07 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Feb 22 22:03:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Feb 23 01:55:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 01:55:39 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:39 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:39 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Feb 23 06:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:44 2012] Using photon index=1.80, rate=0.0885, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src18.arf
[Thu Feb 23 06:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:44 2012] Updating source flux to 2.6e-12
[Thu Feb 23 06:33:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting