[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (287.8, 108.0) = 5 34 30.90 21 48 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.2 +/- 21.7
  Background counts = 104.6
  Rate = 0.01 +/- 0.002

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 13.83'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Mon Feb 20 09:46:46 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.100
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 13.34"
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81.csv
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81.csv
[Mon Feb 20 19:05:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:58 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon Feb 20 19:05:58 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon Feb 20 19:05:58 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Feb 21 07:26:59 2012] Source 88 is offset by -0.975211 and -4.197816 pixels which is larger than
2 X fitted extent = 1.475499 x 1.475499, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Source 88 is offset by 3.930628 and 6.088322 pixels which is larger than
2 X fitted extent = 1.516428 x 1.516428, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 81 centroid is now closest to src. 4
[Tue Feb 21 07:26:59 2012] Source 88 is offset by -5.545786 and 4.623655 pixels which is larger than
2 X fitted extent = 1.609320 x 1.609320, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Tue Feb 21 07:27:37 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.100
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 13.34"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73.csv
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73.csv
[Tue Feb 21 22:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue Feb 21 22:13:39 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Wed Feb 22 17:01:08 2012] Source 88 is offset by -0.975211 and -4.197816 pixels which is larger than
2 X fitted extent = 1.475499 x 1.475499, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 13.707251 pixels away
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 73 centroid is now closest to src. 5
[Wed Feb 22 17:01:08 2012] Source 88 is offset by -5.545786 and 4.623655 pixels which is larger than
2 X fitted extent = 1.609320 x 1.609320, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:01:08 2012] Source is confused with source 5
[Wed Feb 22 17:02:21 2012] XMMSAS src. selection expression = ellipse(24992.602631, 9347.344017, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:21 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88_src.reg
[Wed Feb 22 17:02:21 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (250, 70) - (325, 145)
[Wed Feb 22 17:02:21 2012] XMMSAS bgd. selection expression = annulus(24992.602631, 9347.344017, 1087.500000, 2175.000000, X, Y) && !ellipse(24064.223846, 10647.521156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.028000, 9995.286000, 1492.560043, 1492.560043, 0.000000, X, Y) && !ellipse(23971.372162, 8818.719719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.872070, 11779.271866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.151600, 11415.898200, 1998.392058, 1124.192032, 51.378000, X, Y) && !ellipse(23729.071533, 7874.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y) && !ellipse(24617.542572, 11960.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.341309, 11350.470032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.277200, 11253.666000, 2044.704059, 2044.704059, 0.000000, X, Y)
[Wed Feb 22 17:02:21 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88.gif
[Wed Feb 22 19:14:07 2012] Mean detx,y = (15184.15, -1186.68) 
[Wed Feb 22 19:14:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 19:14:27 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 19:14:27 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed Feb 22 19:14:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Wed Feb 22 21:58:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 21:58:07 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu Feb 23 06:23:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:38 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src88.arf
[Thu Feb 23 06:23:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:39 2012] Updating source flux to 3.2e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting