[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (270.8, 131.0) = 5 34 36.23 21 50 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.5 +/- 23.1
  Background counts = 163.1
  Rate = 0.009 +/- 0.002

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 12.30'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.913
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 12.58"
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79.csv
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79.csv
[Mon Feb 20 19:05:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Feb 20 19:05:57 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 79 centroid is now closest to src. 83
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 23
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Tue Feb 21 07:27:37 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.913
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 12.58"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71.csv
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71.csv
[Tue Feb 21 22:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Feb 21 22:13:39 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Feb 22 17:01:08 2012] Source 86 is offset by 5.411210 and 5.391219 pixels which is larger than
2 X fitted extent = 1.516428 x 1.516428, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Source 86 is offset by 4.649670 and 5.892529 pixels which is larger than
2 X fitted extent = 1.421232 x 1.421232, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 13.168234 pixels away
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:21 2012] XMMSAS src. selection expression = ellipse(23509.341309, 11350.470032, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:21 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86_src.reg
[Wed Feb 22 17:02:21 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (233, 94) - (308, 169)
[Wed Feb 22 17:02:21 2012] XMMSAS bgd. selection expression = annulus(23509.341309, 11350.470032, 1087.500000, 2175.000000, X, Y) && !ellipse(24064.223846, 10647.521156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.028000, 9995.286000, 1492.560043, 1492.560043, 0.000000, X, Y) && !ellipse(23971.372162, 8818.719719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.228424, 12828.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.872070, 11779.271866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.151600, 11415.898200, 1998.392058, 1124.192032, 51.378000, X, Y) && !ellipse(24446.724400, 14037.072000, 1299.864037, 1299.864037, 0.000000, X, Y) && !ellipse(24343.827637, 13793.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y) && !ellipse(24201.175568, 12475.494888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.608063, 12396.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.542572, 11960.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.277200, 11253.666000, 2044.704059, 2044.704059, 0.000000, X, Y) && !ellipse(24992.602631, 9347.344017, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 17:02:21 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86.gif
[Wed Feb 22 19:07:57 2012] Mean detx,y = (13247.29, 225.40) 
[Wed Feb 22 19:07:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 19:08:12 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 19:08:13 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Wed Feb 22 19:08:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Wed Feb 22 21:53:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 21:53:30 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Thu Feb 23 06:23:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:38 2012] Using photon index=1.80, rate=0.00852, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src86.arf
[Thu Feb 23 06:23:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:38 2012] Updating source flux to 2.1e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting