[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (290.9, 161.0) = 5 34 29.94 21 52 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.0 +/- 25.3
  Background counts = 279.4
  Rate = 0.02 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 9.98'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 11.42"
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73.csv
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73.csv
[Mon Feb 20 19:05:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Feb 20 19:05:57 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 73 centroid is now closest to src. 78
[Tue Feb 21 07:26:59 2012] Spatial fit model total counts = 4700.890000, observed total counts = 4710.000000
[Tue Feb 21 07:26:59 2012] Offset between fit and detection position for source 80 = 0.671523 pixels
[Tue Feb 21 07:26:59 2012] Warning, changing simple spatial fit ID from 73 to 75
[Tue Feb 21 07:26:59 2012] 4365.525900 total counts/ 4353.130000 bgd. counts: snr = 0.187879
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.671523 pixels
  Position = (290.3, 161.1) = 5 34 30.15 21 52 18.7
  Extent = 2.9 (2.9-3.0)", rotation angle = 0
  Source counts = 12.4 +/- 66.1
  Background counts = 4353.1
  Rate = 0.0009 +/- 0.005
  Deleting source due to low Poisson probability