[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (284.2, 180.9) = 5 34 32.04 21 53 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.2 +/- 36.4
  Background counts = 415.8
  Rate = 0.04 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 8.58'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 10.72"
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src69.ximg exists
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src69_1.ximg exists
[Mon Feb 20 19:05:53 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src69 appears to have run properly
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Mon Feb 20 19:05:57 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Tue Feb 21 07:26:59 2012] Spatial fit model total counts = 7729.980000, observed total counts = 7730.000000
[Tue Feb 21 07:26:59 2012] Offset between fit and detection position for source 76 = 2.601454 pixels
[Tue Feb 21 07:26:59 2012] Warning, changing simple spatial fit ID from 69 to 67
[Tue Feb 21 07:26:59 2012] 7728.359000 total counts/ 7036.150000 bgd. counts: snr = 8.252199
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.601454 pixels
  Position = (283.4, 183.4) = 5 34 32.30 21 53 55.5
  Extent = 20.4 (19.6-20.9)", rotation angle = 0
  Source counts = 692.2 +/- 87.9
  Background counts = 7036.1
  Rate = 0.05 +/- 0.006
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 20
[Tue Feb 21 07:27:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 20.45"
[Tue Feb 21 07:27:37 2012] source mask rpix=4.7, npix_max = 108, mask sum = 121, frac = 1.118
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 20.45"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63.csv
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63_1.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63.csv
[Tue Feb 21 22:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Feb 21 22:13:39 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Wed Feb 22 17:01:08 2012] Spatial fit model total counts = 10635.300000, observed total counts = 10637.000000
[Wed Feb 22 17:01:08 2012] Offset between fit and detection position for source 76 = 2.390402 pixels
[Wed Feb 22 17:01:08 2012] Warning, changing simple spatial fit ID from 63 to 61
[Wed Feb 22 17:01:08 2012] 9715.604000 total counts/ 9046.700000 bgd. counts: snr = 7.032645
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.390402 pixels
  Position = (283.3, 181.0) = 5 34 32.32 21 53 45.2
  Extent = 20.9 (20.8-41.7)", rotation angle = 0
  Source counts = 668.9 +/- 98.6
  Background counts = 9046.7
  Rate = 0.05 +/- 0.007
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:20 2012] XMMSAS src. selection expression = ellipse(24597.476800, 15700.744000, 1251.720036, 1251.720036, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76_src.reg
[Wed Feb 22 17:02:20 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (211, 109) - (355, 253)
[Wed Feb 22 17:02:20 2012] XMMSAS bgd. selection expression = annulus(24597.476800, 15700.744000, 2086.200060, 4172.400120, X, Y) && !ellipse(22675.034000, 17711.997200, 1619.520047, 1619.520047, 0.000000, X, Y) && !ellipse(24552.287400, 17056.336000, 3271.808094, 3271.808094, 0.000000, X, Y) && !ellipse(22266.718567, 17655.803528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20721.131760, 17662.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.645721, 17523.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28707.978943, 17451.122009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.667786, 15186.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.228424, 12828.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.872070, 11779.271866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.151600, 11415.898200, 1998.392058, 1124.192032, 51.378000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(20212.380356, 17763.855255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19504.625400, 17803.063000, 1735.208050, 1735.208050, 0.000000, X, Y) && !ellipse(19805.047089, 17831.762939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.220000, 17439.342000, 1603.712046, 1603.712046, 0.000000, X, Y) && !ellipse(20967.164032, 17525.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.676000, 16717.843600, 1243.792036, 1243.792036, 0.000000, X, Y) && !ellipse(21429.704000, 17593.981980, 1677.952048, 1677.952048, 0.000000, X, Y) && !ellipse(20076.124000, 16684.312000, 1256.032036, 1256.032036, 0.000000, X, Y) && !ellipse(22139.510803, 16508.314468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19615.848373, 16332.430725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.074768, 16400.953049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.108307, 15077.419617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24446.724400, 14037.072000, 1299.864037, 1299.864037, 0.000000, X, Y) && !ellipse(24343.827637, 13793.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y) && !ellipse(24201.175568, 12475.494888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.608063, 12396.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.542572, 11960.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.341309, 11350.470032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.277200, 11253.666000, 2044.704059, 2044.704059, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76.gif
[Wed Feb 22 18:53:59 2012] Mean detx,y = (8776.07, -508.77) 
[Wed Feb 22 18:54:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 18:54:19 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 18:54:19 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed Feb 22 18:54:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Feb 23 06:23:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:38 2012] Using photon index=1.80, rate=0.0494, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src76.arf
[Thu Feb 23 06:23:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:38 2012] Updating source flux to 7.8e-13
[Thu Feb 23 06:23:52 2012] Flag c found in src. 76 procflags, skipping spectral fitting