[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (283.2, 189.1) = 5 34 32.34 21 54 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.4 +/- 39.2
  Background counts = 471.4
  Rate = 0.04 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 8.00'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 10.43"
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67.csv
[Mon Feb 20 19:05:53 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Feb 20 19:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67.csv
[Mon Feb 20 19:05:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Feb 20 19:05:57 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 10.062717 pixels away
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 67 centroid is now closest to src. 76
[Tue Feb 21 07:26:59 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 11.704127 pixels away
[Tue Feb 21 07:26:59 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 14.397232 pixels away
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 76
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Tue Feb 21 07:27:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 10.43"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61.csv
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61_1.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61.csv
[Tue Feb 21 22:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Feb 21 22:13:39 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 61 centroid is now closest to src. 76
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:20 2012] XMMSAS src. selection expression = ellipse(24594.074768, 16400.953049, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74_src.reg
[Wed Feb 22 17:02:20 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (246, 152) - (321, 227)
[Wed Feb 22 17:02:20 2012] XMMSAS bgd. selection expression = annulus(24594.074768, 16400.953049, 1087.500000, 2175.000000, X, Y) && !ellipse(22675.034000, 17711.997200, 1619.520047, 1619.520047, 0.000000, X, Y) && !ellipse(24552.287400, 17056.336000, 3271.808094, 3271.808094, 0.000000, X, Y) && !ellipse(22266.718567, 17655.803528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.645721, 17523.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.667786, 15186.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(26231.220000, 17439.342000, 1603.712046, 1603.712046, 0.000000, X, Y) && !ellipse(22988.676000, 16717.843600, 1243.792036, 1243.792036, 0.000000, X, Y) && !ellipse(21429.704000, 17593.981980, 1677.952048, 1677.952048, 0.000000, X, Y) && !ellipse(22139.510803, 16508.314468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24597.476800, 15700.744000, 1668.960048, 1668.960048, 0.000000, X, Y) && !ellipse(24955.108307, 15077.419617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24446.724400, 14037.072000, 1299.864037, 1299.864037, 0.000000, X, Y) && !ellipse(24343.827637, 13793.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74.gif
[Wed Feb 22 18:52:43 2012] Mean detx,y = (8138.27, -520.31) 
[Wed Feb 22 18:52:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 18:53:08 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 18:53:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Feb 22 18:53:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Wed Feb 22 21:37:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 21:37:41 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Thu Feb 23 06:23:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:38 2012] Using photon index=1.80, rate=0.0419, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src74.arf
[Thu Feb 23 06:23:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:38 2012] Updating source flux to 7e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting