[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (248.7, 204.5) = 5 34 43.13 21 55 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.5 +/- 30.5
  Background counts = 452.8
  Rate = 0.03 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 7.71'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 10.28"
[Mon Feb 20 19:05:52 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62.ximg exists
[Mon Feb 20 19:05:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62.csv
[Mon Feb 20 19:05:52 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Feb 20 19:05:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62.csv
[Mon Feb 20 19:05:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:56 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Feb 20 19:05:57 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Feb 20 19:05:57 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Tue Feb 21 07:26:59 2012] Spatial fit model total counts = 4887.830000, observed total counts = 4888.000000
[Tue Feb 21 07:26:59 2012] Offset between fit and detection position for source 69 = 2.511026 pixels
[Tue Feb 21 07:26:59 2012] Warning, changing simple spatial fit ID from 62 to 60
[Tue Feb 21 07:26:59 2012] 4495.225000 total counts/ 886.765000 bgd. counts: snr = 121.176282
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 2.511026 pixels
  Position = (246.9, 202.8) = 5 34 43.71 21 55 19.8
  Extent = 21.0 (21.0-41.9)", rotation angle = 0
  Source counts = 3608.5 +/- 67.0
  Background counts = 886.8
  Rate = 0.3 +/- 0.005
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 16
[Tue Feb 21 07:27:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 20.97"
[Tue Feb 21 07:27:37 2012] source mask rpix=4.8, npix_max = 113, mask sum = 107, frac = 0.945
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 20.97"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56.csv
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56_1.ximg exists
[Tue Feb 21 22:13:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56.csv
[Tue Feb 21 22:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Tue Feb 21 22:13:39 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 56 centroid is now closest to src. 73
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:20 2012] Counts = 3608.460000, rescaling region sizes by 2.000000
[Wed Feb 22 17:02:20 2012] XMMSAS src. selection expression = ellipse(21429.704000, 17593.981980, 2516.928072, 2516.928072, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69_src.reg
[Wed Feb 22 17:02:20 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (102, 58) - (392, 347)
[Wed Feb 22 17:02:20 2012] XMMSAS bgd. selection expression = annulus(21429.704000, 17593.981980, 8389.760241, 16779.520483, X, Y) && !ellipse(22675.034000, 17711.997200, 1619.520047, 1619.520047, 0.000000, X, Y) && !ellipse(24552.287400, 17056.336000, 3271.808094, 3271.808094, 0.000000, X, Y) && !ellipse(22266.718567, 17655.803528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24064.223846, 10647.521156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.028000, 9995.286000, 1492.560043, 1492.560043, 0.000000, X, Y) && !ellipse(23971.372162, 8818.719719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18262.510910, 29896.332886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31634.230103, 27704.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17919.993546, 26228.964813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31590.950470, 26055.487854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31497.947449, 25259.265808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17658.555200, 25266.579800, 1212.600035, 1212.600035, 0.000000, X, Y) && !ellipse(31442.860901, 22303.278320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20721.131760, 17662.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.645721, 17523.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28707.978943, 17451.122009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18275.776764, 17092.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.667786, 15186.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.228424, 12828.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.872070, 11779.271866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.151600, 11415.898200, 1998.392058, 1124.192032, 51.378000, X, Y) && !ellipse(23729.071533, 7874.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17398.188690, 29305.469391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.007965, 29262.654388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18141.961960, 28910.663879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17249.449966, 28546.922211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.059082, 28128.967499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18051.031189, 27636.225922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31584.007568, 27355.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17401.208000, 25977.726000, 1276.296037, 1276.296037, 0.000000, X, Y) && !ellipse(32422.510956, 26056.722443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17294.568207, 24481.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31656.942000, 24491.166000, 772.081622, 772.081622, 0.000000, X, Y) && !ellipse(17654.921400, 23930.369000, 1598.824046, 1598.824046, 0.000000, X, Y) && !ellipse(32740.042000, 23542.760000, 1487.128043, 1487.128043, 0.000000, X, Y) && !ellipse(31797.902000, 23664.826000, 633.260018, 633.260018, 0.000000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(31169.470294, 23913.790282, 1544.160044, 1332.758636, 133.365003, X, Y) && !ellipse(17090.731200, 22554.850920, 659.525619, 659.525619, 0.000000, X, Y) && !ellipse(32282.152000, 22153.808000, 1551.120045, 1551.120045, 0.000000, X, Y) && !ellipse(31405.743591, 21883.003113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16746.477234, 21869.796997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17747.125916, 21874.994217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31889.198000, 21434.172000, 1546.264044, 1546.264044, 0.000000, X, Y) && !ellipse(17292.905800, 21121.582000, 1636.680047, 1636.680047, 0.000000, X, Y) && !ellipse(17540.766000, 20286.238000, 718.083221, 718.083221, 0.000000, X, Y) && !ellipse(32415.533539, 20503.630432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17337.110000, 20218.616000, 1744.104050, 1744.104050, 0.000000, X, Y) && !ellipse(31662.933624, 20481.800781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17405.232400, 19897.158000, 1716.928049, 1716.928049, 0.000000, X, Y) && !ellipse(20212.380356, 17763.855255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19504.625400, 17803.063000, 1735.208050, 1735.208050, 0.000000, X, Y) && !ellipse(19805.047089, 17831.762939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18247.824000, 17982.978800, 1765.712051, 1257.240036, 0.000000, X, Y) && !ellipse(26231.220000, 17439.342000, 1603.712046, 1603.712046, 0.000000, X, Y) && !ellipse(20967.164032, 17525.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.676000, 16717.843600, 1243.792036, 1243.792036, 0.000000, X, Y) && !ellipse(20076.124000, 16684.312000, 1256.032036, 1256.032036, 0.000000, X, Y) && !ellipse(18996.419418, 16657.338608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.510803, 16508.314468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19615.848373, 16332.430725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.074768, 16400.953049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18136.523132, 16107.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24597.476800, 15700.744000, 1668.960048, 1668.960048, 0.000000, X, Y) && !ellipse(24955.108307, 15077.419617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24446.724400, 14037.072000, 1299.864037, 1299.864037, 0.000000, X, Y) && !ellipse(24343.827637, 13793.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y) && !ellipse(24201.175568, 12475.494888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.608063, 12396.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.542572, 11960.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.341309, 11350.470032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.277200, 11253.666000, 2044.704059, 2044.704059, 0.000000, X, Y) && !ellipse(24992.602631, 9347.344017, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69.gif
[Wed Feb 22 18:44:02 2012] Mean detx,y = (7779.17, 2536.60) 
[Wed Feb 22 18:44:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 18:49:55 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 18:49:55 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Feb 22 18:49:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Thu Feb 23 06:23:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:38 2012] Using photon index=1.80, rate=0.266, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src69.arf
[Thu Feb 23 06:23:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:38 2012] Updating source flux to 3.7e-12
[Thu Feb 23 06:23:52 2012] Flag c found in src. 69 procflags, skipping spectral fitting