[Mon Feb 20 09:42:56 2012] Detection parameters:
  Position = (258.6, 198.0) = 5 34 40.04 21 54 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.2 +/- 31.0
  Background counts = 436.7
  Rate = 0.02 +/- 0.003

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 7.83'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.34"
[Mon Feb 20 19:05:52 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src61.ximg exists
[Mon Feb 20 19:05:52 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Feb 20 19:05:52 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src61 appears to have run properly
[Mon Feb 20 19:05:56 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Feb 20 19:05:56 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Feb 20 19:05:56 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 61 centroid is now closest to src. 1
[Tue Feb 21 07:26:59 2012] Source 68 is offset by 1.155389 and 2.494407 pixels which is larger than
2 X fitted extent = 1.181789 x 1.181789, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Spatial fit model total counts = 5076.380000, observed total counts = 5069.000000
[Tue Feb 21 07:26:59 2012] Offset between fit and detection position for source 68 = 8.160817 pixels
[Tue Feb 21 07:26:59 2012] Warning, changing simple spatial fit ID from 61 to 65
[Tue Feb 21 07:26:59 2012] 4923.876000 total counts/ 4625.250000 bgd. counts: snr = 4.390965
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 8.160817 pixels
  Position = (264.8, 192.7) = 5 34 38.11 21 54 36.0
  Extent = 15.5 (10.9-19.5)", rotation angle = 0
  Source counts = 298.6 +/- 70.2
  Background counts = 4625.2
  Rate = 0.02 +/- 0.005
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 17
[Tue Feb 21 07:26:59 2012] Source is confused with source 72
[Tue Feb 21 07:27:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 15.55"
[Tue Feb 21 07:27:37 2012] source mask rpix=3.6, npix_max = 66, mask sum = 61, frac = 0.919
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 15.55"
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src55.ximg exists
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue Feb 21 22:13:37 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src55 appears to have run properly
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue Feb 21 22:13:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55.csv
[Tue Feb 21 22:13:39 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Feb 21 22:13:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55.csv
[Tue Feb 21 22:13:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:01:08 2012] Source 68 is offset by -2.834989 and 5.346708 pixels which is larger than
2 X fitted extent = 1.421232 x 1.421232, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 55 centroid is now closest to src. 3
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:20 2012] XMMSAS src. selection expression = ellipse(22988.676000, 16717.843600, 932.844027, 932.844027, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68_src.reg
[Wed Feb 22 17:02:20 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (211, 139) - (318, 246)
[Wed Feb 22 17:02:20 2012] XMMSAS bgd. selection expression = annulus(22988.676000, 16717.843600, 1554.740045, 3109.480089, X, Y) && !ellipse(22675.034000, 17711.997200, 1619.520047, 1619.520047, 0.000000, X, Y) && !ellipse(24552.287400, 17056.336000, 3271.808094, 3271.808094, 0.000000, X, Y) && !ellipse(22266.718567, 17655.803528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20721.131760, 17662.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.645721, 17523.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24247.667786, 15186.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.228424, 12828.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(20212.380356, 17763.855255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19504.625400, 17803.063000, 1735.208050, 1735.208050, 0.000000, X, Y) && !ellipse(19805.047089, 17831.762939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18247.824000, 17982.978800, 1765.712051, 1257.240036, 0.000000, X, Y) && !ellipse(26231.220000, 17439.342000, 1603.712046, 1603.712046, 0.000000, X, Y) && !ellipse(20967.164032, 17525.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21429.704000, 17593.981980, 1677.952048, 1677.952048, 0.000000, X, Y) && !ellipse(20076.124000, 16684.312000, 1256.032036, 1256.032036, 0.000000, X, Y) && !ellipse(22139.510803, 16508.314468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19615.848373, 16332.430725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.074768, 16400.953049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24597.476800, 15700.744000, 1668.960048, 1668.960048, 0.000000, X, Y) && !ellipse(24955.108307, 15077.419617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24446.724400, 14037.072000, 1299.864037, 1299.864037, 0.000000, X, Y) && !ellipse(24343.827637, 13793.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y)
[Wed Feb 22 17:02:20 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68.gif
[Wed Feb 22 18:43:05 2012] Mean detx,y = (7867.00, 1025.39) 
[Wed Feb 22 18:43:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 18:43:36 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 18:43:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Feb 22 18:43:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Thu Feb 23 06:23:34 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:34 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Feb 23 06:23:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:37 2012] Using photon index=1.80, rate=0.022, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src68.arf
[Thu Feb 23 06:23:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:38 2012] Updating source flux to 4e-13
[Thu Feb 23 06:23:52 2012] Flag b found in src. 68 procflags, skipping spectral fitting
[Thu Feb 23 06:23:52 2012] Flag c found in src. 68 procflags, skipping spectral fitting