[Mon Feb 20 09:42:55 2012] Detection parameters:
  Position = (193.0, 251.9) = 5 35 0.55 21 58 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.3 +/- 32.4
  Background counts = 440.2
  Rate = 0.02 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 8.35'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.521
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.60"
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45.csv
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45.csv
[Mon Feb 20 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:56 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Feb 20 19:05:56 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Feb 20 19:05:56 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Feb 21 07:26:59 2012] Source 52 is offset by 9.362727 and 3.227023 pixels which is larger than
2 X fitted extent = 6.915173 x 6.915173, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 55
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Tue Feb 21 07:27:37 2012] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.521
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 10.60"
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40.csv
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40.csv
[Tue Feb 21 22:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Feb 21 22:13:38 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Wed Feb 22 17:01:08 2012] Source 52 is offset by 8.922934 and 3.382402 pixels which is larger than
2 X fitted extent = 6.882943 x 6.882943, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 16.839568 pixels away
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:19 2012] XMMSAS src. selection expression = ellipse(16746.477234, 21869.796997, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:19 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52_src.reg
[Wed Feb 22 17:02:19 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (156, 214) - (231, 289)
[Wed Feb 22 17:02:19 2012] XMMSAS bgd. selection expression = annulus(16746.477234, 21869.796997, 1087.500000, 2175.000000, X, Y) && !ellipse(17294.568207, 24481.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17654.921400, 23930.369000, 1598.824046, 1598.824046, 0.000000, X, Y) && !ellipse(17090.731200, 22554.850920, 659.525619, 659.525619, 0.000000, X, Y) && !ellipse(17747.125916, 21874.994217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17292.905800, 21121.582000, 1636.680047, 1636.680047, 0.000000, X, Y) && !ellipse(17540.766000, 20286.238000, 718.083221, 718.083221, 0.000000, X, Y) && !ellipse(17337.110000, 20218.616000, 1744.104050, 1744.104050, 0.000000, X, Y) && !ellipse(17405.232400, 19897.158000, 1716.928049, 1716.928049, 0.000000, X, Y) && !ellipse(18247.824000, 17982.978800, 1765.712051, 1257.240036, 0.000000, X, Y)
[Wed Feb 22 17:02:19 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52.gif
[Wed Feb 22 17:57:19 2012] Mean detx,y = (3101.79, 7531.58) 
[Wed Feb 22 17:57:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 17:57:34 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 17:57:34 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Feb 22 17:57:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Wed Feb 22 20:40:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 20:40:10 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:33 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:33 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Feb 23 06:23:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:36 2012] Using photon index=1.80, rate=0.0231, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src52.arf
[Thu Feb 23 06:23:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:36 2012] Updating source flux to 4e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting