[Mon Feb 20 09:42:55 2012] Detection parameters:
  Position = (373.2, 300.1) = 5 34 4.19 22 2 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.4 +/- 29.5
  Background counts = 345.7
  Rate = 0.02 +/- 0.003

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 5.42'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.108
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.14"
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:55 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Feb 20 19:05:55 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Feb 20 19:05:55 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Feb 21 07:26:59 2012] Source 37 is offset by -4.291552 and -8.998524 pixels which is larger than
2 X fitted extent = 1.050630 x 1.050630, not incorporating fit results
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Tue Feb 21 07:27:37 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.108
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 9.14"
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 22:13:36 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 22:13:38 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Feb 22 17:01:08 2012] Source 37 is offset by -4.284978 and -8.366202 pixels which is larger than
2 X fitted extent = 1.050630 x 1.050630, not incorporating fit results
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:18 2012] XMMSAS src. selection expression = ellipse(32422.510956, 26056.722443, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:18 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37_src.reg
[Wed Feb 22 17:02:18 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (336, 263) - (411, 338)
[Wed Feb 22 17:02:18 2012] XMMSAS bgd. selection expression = annulus(32422.510956, 26056.722443, 1087.500000, 2175.000000, X, Y) && !ellipse(31634.230103, 27704.229187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31590.950470, 26055.487854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31497.947449, 25259.265808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.059082, 28128.967499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31584.007568, 27355.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31656.942000, 24491.166000, 772.081622, 772.081622, 0.000000, X, Y) && !ellipse(32740.042000, 23542.760000, 1487.128043, 1487.128043, 0.000000, X, Y) && !ellipse(31797.902000, 23664.826000, 633.260018, 633.260018, 0.000000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(31169.470294, 23913.790282, 1544.160044, 1332.758636, 133.365003, X, Y)
[Wed Feb 22 17:02:18 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37.gif
[Wed Feb 22 17:41:19 2012] Mean detx,y = (-1865.05, -7812.11) 
[Wed Feb 22 17:41:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 17:41:48 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 17:41:48 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Feb 22 17:41:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed Feb 22 19:54:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 19:54:28 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:32 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:32 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Feb 23 06:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:35 2012] Using photon index=1.80, rate=0.0193, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src37.arf
[Thu Feb 23 06:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:35 2012] Updating source flux to 3.5e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting