[Mon Feb 20 09:42:55 2012] Detection parameters:
  Position = (273.3, 91.1) = 5 34 35.44 21 47 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.8 +/- 26.0
  Background counts = 85.9
  Rate = 0.02 +/- 0.002

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 15.14'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Mon Feb 20 09:46:46 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.012
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 14.00"
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21.csv
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21.csv
[Mon Feb 20 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:54 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Feb 20 19:05:54 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Feb 20 19:05:54 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 18.490447 pixels away
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Tue Feb 21 07:27:37 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.012
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.00"
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19.csv
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19.csv
[Tue Feb 21 22:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Feb 21 22:13:38 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Feb 21 22:13:38 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 19 centroid is now closest to src. 6
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:17 2012] XMMSAS src. selection expression = ellipse(23729.071533, 7874.253448, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:17 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24_src.reg
[Wed Feb 22 17:02:17 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (236, 54) - (311, 129)
[Wed Feb 22 17:02:18 2012] XMMSAS bgd. selection expression = annulus(23729.071533, 7874.253448, 1087.500000, 2175.000000, X, Y) && !ellipse(24064.223846, 10647.521156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.028000, 9995.286000, 1492.560043, 1492.560043, 0.000000, X, Y) && !ellipse(23971.372162, 8818.719719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.151600, 11415.898200, 1998.392058, 1124.192032, 51.378000, X, Y) && !ellipse(24637.277200, 11253.666000, 2044.704059, 2044.704059, 0.000000, X, Y) && !ellipse(24992.602631, 9347.344017, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 17:02:18 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24.gif
[Wed Feb 22 17:36:01 2012] Mean detx,y = (16625.72, -147.15) 
[Wed Feb 22 17:36:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 17:36:19 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 17:36:20 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Feb 22 17:36:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Feb 22 19:47:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 19:47:52 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:31 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:31 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Feb 23 06:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:35 2012] Using photon index=1.80, rate=0.0198, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src24.arf
[Thu Feb 23 06:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:35 2012] Updating source flux to 6.6e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting