[Mon Feb 20 09:42:55 2012] Detection parameters:
  Position = (238.7, 203.6) = 5 34 46.25 21 55 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.5 +/- 30.2
  Background counts = 331.3
  Rate = 0.05 +/- 0.004

[Mon Feb 20 09:42:56 2012] Off-axis axis estimate = 8.13'
[Mon Feb 20 09:46:46 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:46:46 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Mon Feb 20 09:46:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.590
[Mon Feb 20 09:46:46 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.49"
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13.csv
[Mon Feb 20 19:05:51 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Feb 20 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13.csv
[Mon Feb 20 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:05:54 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Feb 20 19:05:54 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Feb 20 19:05:54 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Feb 21 07:26:59 2012] Warning, spatial fit 13 centroid is now closest to src. 72
[Tue Feb 21 07:26:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:26:59 2012] Assessing source extent using major
[Tue Feb 21 07:26:59 2012] Source does appear to be extended
[Tue Feb 21 07:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:26:59 2012] Source is confused with source 62
[Tue Feb 21 07:26:59 2012] Source is confused with source 63
[Tue Feb 21 07:26:59 2012] Source is confused with source 67
[Tue Feb 21 07:26:59 2012] Source is confused with source 69
[Tue Feb 21 07:27:37 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:27:37 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Tue Feb 21 07:27:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.590
[Tue Feb 21 07:27:37 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.49"
[Tue Feb 21 22:13:35 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11.csv
[Tue Feb 21 22:13:36 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Feb 21 22:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11.csv
[Tue Feb 21 22:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 21 22:13:37 2012] fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 21 22:13:38 2012] Fit fullrun_mos1_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Feb 22 17:01:08 2012] Warning, spatial fit 11 centroid is now closest to src. 70
[Wed Feb 22 17:01:08 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.789879 pixels away
[Wed Feb 22 17:01:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:08 2012] Assessing source extent using major
[Wed Feb 22 17:01:08 2012] Source does appear to be extended
[Wed Feb 22 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:17 2012] XMMSAS src. selection expression = ellipse(20721.131760, 17662.265869, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 17:02:17 2012] Writing source region out to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16_src.reg
[Wed Feb 22 17:02:17 2012] Extracting stamp from image fullrun_mos1_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (201, 166) - (276, 241)
[Wed Feb 22 17:02:17 2012] XMMSAS bgd. selection expression = annulus(20721.131760, 17662.265869, 1087.500000, 2175.000000, X, Y) && !ellipse(22675.034000, 17711.997200, 1619.520047, 1619.520047, 0.000000, X, Y) && !ellipse(24552.287400, 17056.336000, 3271.808094, 3271.808094, 0.000000, X, Y) && !ellipse(22266.718567, 17655.803528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.645721, 17523.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18275.776764, 17092.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32102.665800, 22970.882000, 9302.016268, 9302.016268, 0.000000, X, Y) && !ellipse(17292.905800, 21121.582000, 1636.680047, 1636.680047, 0.000000, X, Y) && !ellipse(17337.110000, 20218.616000, 1744.104050, 1744.104050, 0.000000, X, Y) && !ellipse(17405.232400, 19897.158000, 1716.928049, 1716.928049, 0.000000, X, Y) && !ellipse(20212.380356, 17763.855255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19504.625400, 17803.063000, 1735.208050, 1735.208050, 0.000000, X, Y) && !ellipse(19805.047089, 17831.762939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18247.824000, 17982.978800, 1765.712051, 1257.240036, 0.000000, X, Y) && !ellipse(20967.164032, 17525.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22988.676000, 16717.843600, 1243.792036, 1243.792036, 0.000000, X, Y) && !ellipse(21429.704000, 17593.981980, 1677.952048, 1677.952048, 0.000000, X, Y) && !ellipse(20076.124000, 16684.312000, 1256.032036, 1256.032036, 0.000000, X, Y) && !ellipse(18996.419418, 16657.338608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.510803, 16508.314468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19615.848373, 16332.430725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18136.523132, 16107.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.595600, 13434.054000, 2599.136075, 2599.136075, 0.000000, X, Y)
[Wed Feb 22 17:02:17 2012] Writing fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16.gif
[Wed Feb 22 17:29:54 2012] Mean detx,y = (7147.87, 3378.27) 
[Wed Feb 22 17:29:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 17:30:31 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 17:30:31 2012] Setting source spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Feb 22 17:30:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Feb 22 19:40:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 19:40:03 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:31 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:31 2012] Error reading totcts from fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Feb 23 06:23:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:35 2012] Using photon index=1.80, rate=0.0484, arf fullrun_mos1_xmm0412591201_pi300-10000_pass1_cl_src16.arf
[Thu Feb 23 06:23:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:35 2012] Updating source flux to 8.6e-13
[Thu Feb 23 06:23:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting