[Mon Apr 30 19:48:39 2012] Detection parameters:
  Position = (301.8, 388.9) = 5 34 26.50 22 8 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 20.1
  Background counts = 149.3
  Rate = 0.02 +/- 0.005

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 6.57'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 9.71"
[Tue May  1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80.csv
[Tue May  1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80_1.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80.csv
[Tue May  1 09:55:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Tue May  1 09:55:43 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 1949.580000, observed total counts = 1945.000000
[Tue May  1 09:56:46 2012] Offset between fit and detection position for source 88 = 0.211598 pixels
[Tue May  1 09:56:46 2012] 1836.514800 total counts/ 1782.020000 bgd. counts: snr = 1.290918
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.211598 pixels
  Position = (301.8, 389.1) = 5 34 26.51 22 8 50.2
  Extent = 6.2 (2.4-11.5)", rotation angle = 0
  Source counts = 54.5 +/- 42.9
  Background counts = 1782.0
  Rate = 0.01 +/- 0.008
  Deleting source due to low Poisson probability