[Mon Apr 30 19:48:38 2012] Detection parameters:
  Position = (371.7, 233.1) = 5 34 4.66 21 57 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.8 +/- 20.2
  Background counts = 142.2
  Rate = 0.03 +/- 0.006

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 7.11'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.960
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 9.99"
[Tue May  1 09:55:27 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69.ximg exists
[Tue May  1 09:55:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69.csv
[Tue May  1 09:55:27 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69_1.ximg exists
[Tue May  1 09:55:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69.csv
[Tue May  1 09:55:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Tue May  1 09:55:43 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 287501.000000, observed total counts = 1386.000000
[Tue May  1 09:56:46 2012] Poor agreement between spatial fit and data for source 81
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 09:56:46 2012] Source 81 is offset by -4.569310 and -1.141394 pixels which is larger than
2 X fitted extent = 2.657287 x 2.657287, not incorporating fit results
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 82
[Tue May  1 14:49:26 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Tue May  1 14:49:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.960
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.99"
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63.csv
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63_1.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63.csv
[Wed May  2 01:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Wed May  2 01:43:25 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Wed May  2 01:44:07 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 11.489644 pixels away
[Wed May  2 01:44:07 2012] Warning, spatial fit 63 centroid is now closest to src. 82
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:53 2012] XMMSAS src. selection expression = ellipse(32288.578003, 20234.067963, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81_src.reg
[Wed May  2 03:00:53 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (334, 196) - (409, 271)
[Wed May  2 03:00:53 2012] XMMSAS bgd. selection expression = annulus(32288.578003, 20234.067963, 1087.500000, 2175.000000, X, Y) && !ellipse(31662.794000, 23365.047020, 1475.048042, 1475.048042, 0.000000, X, Y) && !ellipse(31650.277100, 22494.344849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.343994, 21962.262375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32070.990387, 23277.007660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.141693, 21445.868469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32015.779053, 22630.354034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31350.516327, 21092.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31777.006000, 20200.786600, 1286.432037, 1286.432037, 0.000000, X, Y) && !ellipse(31323.992584, 20555.534927, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81.gif
[Wed May  2 03:52:21 2012] Mean detx,y = (7843.92, 3692.52) 
[Wed May  2 03:52:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:52:41 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:52:41 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Wed May  2 03:52:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Wed May  2 05:35:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 05:35:17 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:57 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:57 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Wed May  2 05:54:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:54:01 2012] Using photon index=1.80, rate=0.0311, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src81.arf
[Wed May  2 05:54:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:54:01 2012] Updating source flux to 6.5e-13
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting