[Mon Apr 30 19:48:30 2012] Detection parameters:
  Position = (285.0, 363.6) = 5 34 31.78 22 6 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.7 +/- 27.5
  Background counts = 191.7
  Rate = 0.08 +/- 0.007

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 4.82'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.897
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.84"
[Tue May  1 09:55:15 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10.ximg exists
[Tue May  1 09:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10.csv
[Tue May  1 09:55:15 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May  1 09:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10.csv
[Tue May  1 09:55:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:32 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May  1 09:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 09:55:32 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May  1 09:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 09:55:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:46 2012] Source 8 is offset by -0.823270 and 3.758334 pixels which is larger than
2 X fitted extent = 1.024772 x 1.024772, not incorporating fit results
[Tue May  1 09:56:46 2012] Warning, spatial fit 10 centroid is now closest to src. 9
[Tue May  1 09:56:46 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:46 2012] Assessing source extent using major
[Tue May  1 09:56:46 2012] Source does appear to be extended
[Tue May  1 09:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 9
[Tue May  1 14:49:26 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Tue May  1 14:49:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.897
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.84"
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8.csv
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8.csv
[Wed May  2 01:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May  2 01:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May  2 01:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May  2 01:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:44:06 2012] Warning, spatial fit 8 centroid is now closest to src. 1
[Wed May  2 01:44:06 2012] Source 8 is offset by -0.970121 and 8.611483 pixels which is larger than
2 X fitted extent = 1.006414 x 1.006414, not incorporating fit results
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:49 2012] XMMSAS src. selection expression = ellipse(24744.633514, 31581.233063, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:49 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8_src.reg
[Wed May  2 03:00:49 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (247, 326) - (322, 401)
[Wed May  2 03:00:49 2012] XMMSAS bgd. selection expression = annulus(24744.633514, 31581.233063, 1087.500000, 2175.000000, X, Y) && !ellipse(26269.000000, 32775.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.440000, 32094.248000, 821.464024, 821.464024, 0.000000, X, Y) && !ellipse(25553.339508, 31489.140717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.670800, 32140.206000, 1594.320046, 654.895219, 0.000000, X, Y) && !ellipse(25649.430328, 32760.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.590576, 31563.861206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23031.143982, 32016.514496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23731.721252, 31573.785706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.930145, 32382.770477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22968.440400, 31504.032000, 1478.472043, 1478.472043, 0.000000, X, Y) && !ellipse(26589.124847, 31532.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25485.748850, 33275.897600, 1045.880030, 1045.880030, 0.000000, X, Y) && !ellipse(23521.344696, 32670.703094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22253.868225, 31781.839111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21735.439240, 31746.861755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.430634, 31612.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.387787, 31964.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24976.988403, 33262.240967, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:49 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8.gif
[Wed May  2 03:17:54 2012] Mean detx,y = (-335.82, -7261.59) 
[Wed May  2 03:17:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:18:23 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:18:24 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May  2 03:18:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May  2 04:19:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 04:19:27 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:53 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:53 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May  2 05:53:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:58 2012] Using photon index=1.80, rate=0.0763, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src8.arf
[Wed May  2 05:53:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:58 2012] Updating source flux to 1.9e-12
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting