[Mon Apr 30 19:48:37 2012] Detection parameters:
  Position = (369.7, 283.0) = 5 34 5.29 22 1 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.7 +/- 23.5
  Background counts = 184.5
  Rate = 0.04 +/- 0.006

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 5.28'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 9.07"
[Tue May  1 09:55:26 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57.ximg exists
[Tue May  1 09:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57.csv
[Tue May  1 09:55:26 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue May  1 09:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57.csv
[Tue May  1 09:55:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:42 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue May  1 09:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Tue May  1 09:55:42 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue May  1 09:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Tue May  1 09:55:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:46 2012] Warning, spatial fit 57 centroid is now closest to src. 22
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 21
[Tue May  1 14:49:26 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Tue May  1 14:49:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 9.07"
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52.ximg exists
[Wed May  2 01:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52.csv
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed May  2 01:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52.csv
[Wed May  2 01:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:24 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed May  2 01:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May  2 01:43:24 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed May  2 01:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May  2 01:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:44:06 2012] Source 74 is offset by -3.298682 and -2.053034 pixels which is larger than
2 X fitted extent = 0.745582 x 0.745582, not incorporating fit results
[Wed May  2 01:44:07 2012] Warning, spatial fit 52 centroid is now closest to src. 21
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:52 2012] XMMSAS src. selection expression = ellipse(32112.440704, 24570.960083, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:52 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74_src.reg
[Wed May  2 03:00:52 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (332, 245) - (407, 320)
[Wed May  2 03:00:52 2012] XMMSAS bgd. selection expression = annulus(32112.440704, 24570.960083, 1087.500000, 2175.000000, X, Y) && !ellipse(31662.794000, 23365.047020, 1475.048042, 1475.048042, 0.000000, X, Y) && !ellipse(31584.915588, 24726.712067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.277100, 22494.344849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.343994, 21962.262375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32128.388000, 24104.666200, 1480.800043, 1480.800043, 0.000000, X, Y) && !ellipse(31884.660000, 25179.727400, 518.925615, 518.925615, 0.000000, X, Y) && !ellipse(31671.907623, 26541.456451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31739.058624, 27090.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.730103, 26048.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32070.990387, 23277.007660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32015.779053, 22630.354034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.002686, 24158.203918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32504.490295, 25252.832672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32549.824921, 26411.450287, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:52 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74.gif
[Wed May  2 03:44:32 2012] Mean detx,y = (7409.06, -620.46) 
[Wed May  2 03:44:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:44:49 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:44:49 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed May  2 03:44:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Wed May  2 05:24:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 05:24:11 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:56 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:56 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed May  2 05:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:54:00 2012] Using photon index=1.80, rate=0.0363, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src74.arf
[Wed May  2 05:54:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:54:00 2012] Updating source flux to 6.5e-13
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting