[Mon Apr 30 19:48:37 2012] Detection parameters: Position = (197.3, 297.0) = 5 34 59.20 22 2 5.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 106.6 +/- 22.2 Background counts = 183.6 Rate = 0.03 +/- 0.005 [Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 7.33' [Mon Apr 30 23:12:58 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting [Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 10.09" [Mon Apr 30 23:12:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943 [Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 10.09" [Tue May 1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79.ximg exists [Tue May 1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79.csv [Tue May 1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79_1.ximg exists [Tue May 1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79.csv [Tue May 1 09:55:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists [Tue May 1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists [Tue May 1 09:55:43 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly [Tue May 1 09:56:46 2012] Source 71 is offset by -0.028005 and 1.225241 pixels which is larger than 2 X fitted extent = 1.160216 x 1.160216, not incorporating fit results [Tue May 1 09:56:47 2012] Vigneting correction estimate = 1.000000 [Tue May 1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 1 09:56:47 2012] Assessing source extent using major [Tue May 1 09:56:47 2012] Source does appear to be extended [Tue May 1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 1 09:56:47 2012] Source is confused with source 87 [Tue May 1 14:49:26 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting [Tue May 1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 10.09" [Tue May 1 14:49:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943 [Tue May 1 14:49:26 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 10.09" [Wed May 2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71.ximg exists [Wed May 2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71.csv [Wed May 2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71_1.ximg exists [Wed May 2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71.csv [Wed May 2 01:43:21 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists [Wed May 2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists [Wed May 2 01:43:25 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly [Wed May 2 01:44:06 2012] Source 71 is offset by 6.407586 and 4.055123 pixels which is larger than 2 X fitted extent = 2.133986 x 17.071909, not incorporating fit results [Wed May 2 01:44:07 2012] Source 71 is offset by 3.424965 and -4.106072 pixels which is larger than 2 X fitted extent = 1.136161 x 1.136161, not incorporating fit results [Wed May 2 01:44:07 2012] Source 71 is offset by -0.011586 and 1.205261 pixels which is larger than 2 X fitted extent = 1.160216 x 1.160216, not incorporating fit results [Wed May 2 01:44:07 2012] Vigneting correction estimate = 1.000000 [Wed May 2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 01:44:07 2012] Assessing source extent using major [Wed May 2 01:44:07 2012] Source does appear to be extended [Wed May 2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 03:00:54 2012] XMMSAS src. selection expression = ellipse(17119.703995, 25789.039734, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 2 03:00:54 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71_src.reg [Wed May 2 03:00:54 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (160, 259) - (235, 334) [Wed May 2 03:00:54 2012] XMMSAS bgd. selection expression = annulus(17119.703995, 25789.039734, 1087.500000, 2175.000000, X, Y) && !ellipse(18059.438960, 26563.080000, 1198.472034, 895.272026, 47.372700, X, Y) && !ellipse(17835.345901, 23451.042175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18037.372391, 26840.096802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17919.560776, 25786.530731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17714.783676, 24615.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17646.261353, 25269.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16979.530000, 26730.947200, 1600.016046, 1600.016046, 0.000000, X, Y) && !ellipse(17870.064392, 27699.901489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18160.273697, 28261.854370, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 2 03:00:54 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71.gif [Wed May 2 03:56:59 2012] Mean detx,y = (-7569.52, -987.01) [Wed May 2 03:57:01 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 2 03:57:13 2012] Binned source spectrum to 10 counts/bin [Wed May 2 03:57:13 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Wed May 2 03:57:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71_bgd.pi.gz [Wed May 2 05:46:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 2 05:46:35 2012] rmf not generated due to insufficient counts [Wed May 2 05:53:57 2012] Updating aperture counts using extracted products [Wed May 2 05:53:57 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Wed May 2 05:54:01 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 2 05:54:01 2012] Using photon index=1.80, rate=0.0255, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src71.arf [Wed May 2 05:54:01 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 2 05:54:01 2012] Updating source flux to 4.2e-13 [Wed May 2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting