[Mon Apr 30 19:48:37 2012] Detection parameters:
  Position = (364.7, 300.0) = 5 34 6.85 22 2 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.2 +/- 20.1
  Background counts = 193.3
  Rate = 0.04 +/- 0.006

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 4.80'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.586
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.83"
[Tue May  1 09:55:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43.ximg exists
[Tue May  1 09:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43.csv
[Tue May  1 09:55:23 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue May  1 09:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43.csv
[Tue May  1 09:55:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:39 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue May  1 09:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May  1 09:55:39 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue May  1 09:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May  1 09:55:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:46 2012] Source 70 is offset by 3.146300 and 1.696043 pixels which is larger than
2 X fitted extent = 1.033876 x 1.033876, not incorporating fit results
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 18
[Tue May  1 14:49:26 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Tue May  1 14:49:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.586
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 8.83"
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38.ximg exists
[Wed May  2 01:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38.csv
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed May  2 01:43:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38.csv
[Wed May  2 01:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:24 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed May  2 01:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May  2 01:43:24 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May  2 01:43:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May  2 01:43:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:44:06 2012] Source 70 is offset by 1.844344 and 4.099583 pixels which is larger than
2 X fitted extent = 1.357835 x 1.357835, not incorporating fit results
[Wed May  2 01:44:06 2012] Spatial fit model total counts = 2444.900000, observed total counts = 1750.000000
[Wed May  2 01:44:06 2012] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:51 2012] XMMSAS src. selection expression = ellipse(31677.730103, 26048.215729, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:51 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70_src.reg
[Wed May  2 03:00:51 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (327, 262) - (402, 337)
[Wed May  2 03:00:51 2012] XMMSAS bgd. selection expression = annulus(31677.730103, 26048.215729, 1087.500000, 2175.000000, X, Y) && !ellipse(31662.794000, 23365.047020, 1475.048042, 1475.048042, 0.000000, X, Y) && !ellipse(31584.915588, 24726.712067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32128.388000, 24104.666200, 1480.800043, 1480.800043, 0.000000, X, Y) && !ellipse(31884.660000, 25179.727400, 518.925615, 518.925615, 0.000000, X, Y) && !ellipse(31671.907623, 26541.456451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31739.058624, 27090.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32070.990387, 23277.007660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.440704, 24570.960083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.002686, 24158.203918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32504.490295, 25252.832672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.204407, 27955.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32549.824921, 26411.450287, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:51 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70.gif
[Wed May  2 03:37:48 2012] Mean detx,y = (7119.97, -2101.33) 
[Wed May  2 03:37:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:38:09 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:38:10 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed May  2 03:38:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Wed May  2 05:19:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 05:19:47 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:55 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:55 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed May  2 05:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:54:00 2012] Using photon index=1.80, rate=0.043, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src70.arf
[Wed May  2 05:54:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:54:00 2012] Updating source flux to 9.7e-13
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting