[Mon Apr 30 19:48:36 2012] Detection parameters:
  Position = (313.7, 368.0) = 5 34 22.79 22 7 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 22.7
  Background counts = 188.7
  Rate = 0.03 +/- 0.006

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 5.16'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 9.01"
[Tue May  1 09:55:28 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74.csv
[Tue May  1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74_1.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74.csv
[Tue May  1 09:55:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Tue May  1 09:55:43 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 4004.620000, observed total counts = 3026.000000
[Tue May  1 09:56:46 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 3386.050000, observed total counts = 2046.000000
[Tue May  1 09:56:46 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 09:56:46 2012] Source 60 is offset by -0.576637 and -2.339189 pixels which is larger than
2 X fitted extent = 1.105591 x 1.105591, not incorporating fit results
[Tue May  1 09:56:46 2012] Warning, spatial fit 74 centroid is now closest to src. 5
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 65
[Tue May  1 09:56:47 2012] Source is confused with source 66
[Tue May  1 14:49:26 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue May  1 14:49:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.01"
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67.csv
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67_1.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67.csv
[Wed May  2 01:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Wed May  2 01:43:25 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Wed May  2 01:44:07 2012] Warning, spatial fit 67 centroid is now closest to src. 13
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:53 2012] XMMSAS src. selection expression = ellipse(27243.387787, 31964.340515, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60_src.reg
[Wed May  2 03:00:53 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (276, 330) - (351, 405)
[Wed May  2 03:00:53 2012] XMMSAS bgd. selection expression = annulus(27243.387787, 31964.340515, 1087.500000, 2175.000000, X, Y) && !ellipse(26269.000000, 32775.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.440000, 32094.248000, 821.464024, 821.464024, 0.000000, X, Y) && !ellipse(24744.633514, 31581.233063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.339508, 31489.140717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.670800, 32140.206000, 1594.320046, 654.895219, 0.000000, X, Y) && !ellipse(25649.430328, 32760.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.930145, 32382.770477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.124847, 31532.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25485.748850, 33275.897600, 1045.880030, 1045.880030, 0.000000, X, Y) && !ellipse(27900.032288, 31343.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.430634, 31612.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.960000, 31440.937800, 1434.752041, 1434.752041, 0.000000, X, Y) && !ellipse(24976.988403, 33262.240967, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60.gif
[Wed May  2 03:53:51 2012] Mean detx,y = (2151.28, -7694.25) 
[Wed May  2 03:53:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:54:08 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:54:08 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed May  2 03:54:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed May  2 05:35:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 05:35:45 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:57 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:57 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed May  2 05:54:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:54:01 2012] Using photon index=1.80, rate=0.0285, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src60.arf
[Wed May  2 05:54:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:54:01 2012] Updating source flux to 4.7e-13
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting