[Mon Apr 30 19:48:36 2012] Detection parameters:
  Position = (279.5, 101.0) = 5 34 33.47 21 47 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 295.0 +/- 24.9
  Background counts = 48.6
  Rate = 0.05 +/- 0.004

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 14.38'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Mon Apr 30 23:12:58 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.062
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 13.62"
[Tue May  1 09:55:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34.ximg exists
[Tue May  1 09:55:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34.csv
[Tue May  1 09:55:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue May  1 09:55:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34.csv
[Tue May  1 09:55:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:37 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue May  1 09:55:37 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue May  1 09:55:37 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Tue May  1 09:56:46 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.103747 pixels away
[Tue May  1 09:56:46 2012] Warning, spatial fit 34 centroid is now closest to src. 50
[Tue May  1 09:56:46 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 13.663291 pixels away
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 52
[Tue May  1 14:49:26 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Tue May  1 14:49:26 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.062
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 13.62"
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30.ximg exists
[Wed May  2 01:43:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30.csv
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed May  2 01:43:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30.csv
[Wed May  2 01:43:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:23 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed May  2 01:43:23 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed May  2 01:43:23 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed May  2 01:44:06 2012] Spatial fit model total counts = 2175.050000, observed total counts = 2144.000000
[Wed May  2 01:44:06 2012] Offset between fit and detection position for source 55 = 0.749975 pixels
[Wed May  2 01:44:06 2012] 1915.818000 total counts/ 1520.400000 bgd. counts: snr = 10.140923
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.749975 pixels
  Position = (278.8, 101.2) = 5 34 33.71 21 47 57.5
  Extent = 16.6 (12.1-21.2)", rotation angle = 0
  Source counts = 395.4 +/- 43.8
  Background counts = 1520.4
  Rate = 0.07 +/- 0.008
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:51 2012] XMMSAS src. selection expression = ellipse(24206.555800, 8754.149200, 996.786029, 996.786029, 0.000000, X, Y)
[Wed May  2 03:00:51 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55_src.reg
[Wed May  2 03:00:51 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (222, 44) - (336, 158)
[Wed May  2 03:00:51 2012] XMMSAS bgd. selection expression = annulus(24206.555800, 8754.149200, 1661.310048, 3322.620096, X, Y) && !ellipse(24350.247000, 11326.736000, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(24386.624000, 10927.464000, 2591.520075, 2591.520075, 0.000000, X, Y) && !ellipse(24230.534882, 9778.304390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24205.667877, 9178.010231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.887800, 10042.183400, 958.816028, 958.816028, 0.000000, X, Y) && !ellipse(24354.261902, 7966.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23655.333405, 10481.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.996000, 8963.520000, 2105.256061, 2105.256061, 0.000000, X, Y) && !ellipse(23087.698000, 11741.912000, 1941.856056, 1941.856056, 0.000000, X, Y)
[Wed May  2 03:00:51 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55.gif
[Wed May  2 03:31:10 2012] Mean detx,y = (443.12, 15547.28) 
[Wed May  2 03:31:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:32:09 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:32:09 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May  2 03:32:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed May  2 05:53:55 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:55 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May  2 05:53:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:59 2012] Using photon index=1.80, rate=0.0692, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src55.arf
[Wed May  2 05:53:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:59 2012] Updating source flux to 3.4e-12
[Wed May  2 05:57:25 2012] Flag c found in src. 55 procflags, skipping spectral fitting