[Mon Apr 30 19:48:35 2012] Detection parameters:
  Position = (280.0, 124.0) = 5 34 33.31 21 49 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 404.2 +/- 28.4
  Background counts = 55.9
  Rate = 0.07 +/- 0.005

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 12.72'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.761
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.79"
[Tue May  1 09:55:16 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16.ximg exists
[Tue May  1 09:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16.csv
[Tue May  1 09:55:16 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue May  1 09:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16.csv
[Tue May  1 09:55:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:33 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue May  1 09:55:34 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue May  1 09:55:34 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue May  1 09:56:46 2012] Warning, spatial fit 16 centroid is now closest to src. 54
[Tue May  1 09:56:46 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 13.869012 pixels away
[Tue May  1 09:56:46 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:46 2012] Assessing source extent using major
[Tue May  1 09:56:46 2012] Source does appear to be extended
[Tue May  1 09:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 48
[Tue May  1 14:49:26 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Tue May  1 14:49:26 2012] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.761
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.79"
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14.csv
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14.csv
[Wed May  2 01:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May  2 01:43:22 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May  2 01:44:06 2012] Warning, spatial fit 14 centroid is now closest to src. 50
[Wed May  2 01:44:07 2012] Spatial fit model total counts = 5585.600000, observed total counts = 5531.000000
[Wed May  2 01:44:07 2012] Offset between fit and detection position for source 49 = 2.308730 pixels
[Wed May  2 01:44:07 2012] Warning, changing simple spatial fit ID from 14 to 68
[Wed May  2 01:44:07 2012] 5321.129000 total counts/ 4539.340000 bgd. counts: snr = 11.603612
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.308730 pixels
  Position = (280.9, 126.2) = 5 34 33.06 21 49 46.2
  Extent = 32.4 (24.8-48.5)", rotation angle = 0
  Source counts = 781.8 +/- 72.9
  Background counts = 4539.3
  Rate = 0.1 +/- 0.01
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:50 2012] XMMSAS src. selection expression = ellipse(24386.624000, 10927.464000, 1943.640056, 1943.640056, 0.000000, X, Y)
[Wed May  2 03:00:50 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49_src.reg
[Wed May  2 03:00:50 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (169, 14) - (393, 238)
[Wed May  2 03:00:50 2012] XMMSAS bgd. selection expression = annulus(24386.624000, 10927.464000, 3239.400093, 6478.800186, X, Y) && !ellipse(24807.504000, 17300.226000, 2081.296060, 2081.296060, 0.000000, X, Y) && !ellipse(24357.163849, 15186.096603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.929382, 17444.670288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23950.790000, 16076.260000, 495.690414, 495.690414, 0.000000, X, Y) && !ellipse(24350.247000, 11326.736000, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(24230.534882, 9778.304390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.939362, 13089.791672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24546.610600, 16807.988000, 481.856014, 481.856014, 0.000000, X, Y) && !ellipse(24205.667877, 9178.010231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.340800, 13720.600400, 512.668815, 512.668815, 0.000000, X, Y) && !ellipse(24342.585083, 14445.664688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.887800, 10042.183400, 958.816028, 958.816028, 0.000000, X, Y) && !ellipse(24206.555800, 8754.149200, 1329.048038, 1329.048038, 0.000000, X, Y) && !ellipse(24049.406128, 17366.846069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.578430, 16296.938293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.261902, 7966.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.609711, 16249.427872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.518646, 13090.740845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23655.333405, 10481.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.430115, 13791.521225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.996000, 8963.520000, 2105.256061, 2105.256061, 0.000000, X, Y) && !ellipse(23087.698000, 11741.912000, 1941.856056, 1941.856056, 0.000000, X, Y) && !ellipse(23960.345825, 14823.422256, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:50 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49.gif
[Wed May  2 03:21:17 2012] Mean detx,y = (427.44, 13391.50) 
[Wed May  2 03:21:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:23:35 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:23:35 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed May  2 03:23:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed May  2 05:53:54 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:54 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed May  2 05:53:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:59 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src49.arf
[Wed May  2 05:53:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:59 2012] Updating source flux to 4.1e-12
[Wed May  2 05:57:25 2012] Flag c found in src. 49 procflags, skipping spectral fitting