[Mon Apr 30 19:48:35 2012] Detection parameters:
  Position = (273.8, 133.9) = 5 34 35.26 21 50 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.3 +/- 20.8
  Background counts = 49.1
  Rate = 0.03 +/- 0.004

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 12.06'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.928
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 12.46"
[Tue May  1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75.csv
[Tue May  1 09:55:29 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75_1.ximg exists
[Tue May  1 09:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75.csv
[Tue May  1 09:55:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Tue May  1 09:55:43 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Tue May  1 09:55:43 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Tue May  1 09:56:46 2012] Source 47 is offset by 5.426567 and 1.538106 pixels which is larger than
2 X fitted extent = 1.396000 x 1.396000, not incorporating fit results
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 1893.290000, observed total counts = 1865.000000
[Tue May  1 09:56:46 2012] Offset between fit and detection position for source 47 = 7.211595 pixels
[Tue May  1 09:56:46 2012] Warning, changing simple spatial fit ID from 75 to 71
[Tue May  1 09:56:46 2012] 1882.902000 total counts/ 1536.720000 bgd. counts: snr = 8.830944
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 7.211595 pixels
  Position = (266.8, 135.6) = 5 34 37.45 21 50 27.4
  Extent = 24.3 (24.2-48.5)", rotation angle = 0
  Source counts = 346.2 +/- 43.4
  Background counts = 1536.7
  Rate = 0.06 +/- 0.008
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major axis lower bound
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 48
[Tue May  1 14:49:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 24.27"
[Tue May  1 14:49:26 2012] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.974
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 24.27"
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68.csv
[Wed May  2 01:43:21 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68_1.ximg exists
[Wed May  2 01:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68.csv
[Wed May  2 01:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Wed May  2 01:43:25 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Wed May  2 01:43:25 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Wed May  2 01:44:07 2012] Spatial fit model total counts = 1888.390000, observed total counts = 1865.000000
[Wed May  2 01:44:07 2012] Offset between fit and detection position for source 47 = 0.881781 pixels
[Wed May  2 01:44:07 2012] Warning, changing simple spatial fit ID from 68 to 65
[Wed May  2 01:44:07 2012] 1934.141000 total counts/ 1658.420000 bgd. counts: snr = 6.770529
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.881781 pixels
  Position = (265.9, 135.5) = 5 34 37.72 21 50 26.9
  Extent = 24.3 (23.6-48.5)", rotation angle = 0
  Source counts = 275.7 +/- 44.0
  Background counts = 1658.4
  Rate = 0.05 +/- 0.008
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:53 2012] XMMSAS src. selection expression = ellipse(23087.698000, 11741.912000, 1456.392042, 1456.392042, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47_src.reg
[Wed May  2 03:00:53 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (182, 52) - (350, 219)
[Wed May  2 03:00:53 2012] XMMSAS bgd. selection expression = annulus(23087.698000, 11741.912000, 2427.320070, 4854.640140, X, Y) && !ellipse(24807.504000, 17300.226000, 2081.296060, 2081.296060, 0.000000, X, Y) && !ellipse(24357.163849, 15186.096603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.929382, 17444.670288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23950.790000, 16076.260000, 495.690414, 495.690414, 0.000000, X, Y) && !ellipse(24350.247000, 11326.736000, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(24386.624000, 10927.464000, 2591.520075, 2591.520075, 0.000000, X, Y) && !ellipse(24230.534882, 9778.304390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.939362, 13089.791672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24546.610600, 16807.988000, 481.856014, 481.856014, 0.000000, X, Y) && !ellipse(24205.667877, 9178.010231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.340800, 13720.600400, 512.668815, 512.668815, 0.000000, X, Y) && !ellipse(24342.585083, 14445.664688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.887800, 10042.183400, 958.816028, 958.816028, 0.000000, X, Y) && !ellipse(24206.555800, 8754.149200, 1329.048038, 1329.048038, 0.000000, X, Y) && !ellipse(24049.406128, 17366.846069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.578430, 16296.938293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.261902, 7966.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.609711, 16249.427872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.518646, 13090.740845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23655.333405, 10481.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.430115, 13791.521225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.996000, 8963.520000, 2105.256061, 2105.256061, 0.000000, X, Y) && !ellipse(23960.345825, 14823.422256, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:53 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47.gif
[Wed May  2 03:54:17 2012] Mean detx,y = (-510.14, 12630.99) 
[Wed May  2 03:54:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:55:14 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:55:14 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May  2 03:55:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed May  2 05:53:57 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:57 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May  2 05:54:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:54:01 2012] Using photon index=1.80, rate=0.0483, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src47.arf
[Wed May  2 05:54:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:54:01 2012] Updating source flux to 1.2e-12
[Wed May  2 05:57:25 2012] Flag b found in src. 47 procflags, skipping spectral fitting
[Wed May  2 05:57:25 2012] Flag c found in src. 47 procflags, skipping spectral fitting