[Mon Apr 30 19:48:31 2012] Detection parameters:
  Position = (367.2, 290.0) = 5 34 6.07 22 1 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.5 +/- 24.2
  Background counts = 189.4
  Rate = 0.05 +/- 0.007

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 5.02'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.149
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.94"
[Tue May  1 09:55:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29.ximg exists
[Tue May  1 09:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29.csv
[Tue May  1 09:55:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue May  1 09:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29.csv
[Tue May  1 09:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:36 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue May  1 09:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue May  1 09:55:36 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue May  1 09:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue May  1 09:55:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:46 2012] Warning, spatial fit 29 centroid is now closest to src. 91
[Tue May  1 09:56:46 2012] Spatial fit model total counts = 2573.460000, observed total counts = 2588.000000
[Tue May  1 09:56:46 2012] Offset between fit and detection position for source 20 = 0.129474 pixels
[Tue May  1 09:56:46 2012] Warning, changing simple spatial fit ID from 29 to 62
[Tue May  1 09:56:46 2012] 2480.437200 total counts/ 2381.540000 bgd. counts: snr = 2.026539
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.129474 pixels
  Position = (367.0, 290.0) = 5 34 6.11 22 1 38.7
  Extent = 6.5 (4.3-9.3)", rotation angle = 0
  Source counts = 98.9 +/- 49.8
  Background counts = 2381.5
  Rate = 0.02 +/- 0.009
[Tue May  1 09:56:47 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:47 2012] Assessing source extent using major axis lower bound
[Tue May  1 09:56:47 2012] Source does appear to be extended
[Tue May  1 09:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 21
[Tue May  1 14:49:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Tue May  1 14:49:26 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 6.49"
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src26.ximg exists
[Wed May  2 01:43:20 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed May  2 01:43:20 2012] Fit fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src26 appears to have run properly
[Wed May  2 01:43:23 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed May  2 01:43:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed May  2 01:43:23 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed May  2 01:43:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed May  2 01:43:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:44:06 2012] Warning, spatial fit 26 centroid is now closest to src. 74
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:50 2012] XMMSAS src. selection expression = ellipse(31884.660000, 25179.727400, 389.194211, 389.194211, 0.000000, X, Y)
[Wed May  2 03:00:50 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20_src.reg
[Wed May  2 03:00:50 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (345, 268) - (389, 312)
[Wed May  2 03:00:50 2012] XMMSAS bgd. selection expression = annulus(31884.660000, 25179.727400, 648.657019, 1297.314037, X, Y) && !ellipse(31662.794000, 23365.047020, 1475.048042, 1475.048042, 0.000000, X, Y) && !ellipse(31584.915588, 24726.712067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32128.388000, 24104.666200, 1480.800043, 1480.800043, 0.000000, X, Y) && !ellipse(31671.907623, 26541.456451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31739.058624, 27090.237732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.730103, 26048.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32070.990387, 23277.007660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.440704, 24570.960083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.002686, 24158.203918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32504.490295, 25252.832672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32549.824921, 26411.450287, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:50 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20.gif
[Wed May  2 03:29:18 2012] Mean detx,y = (7168.90, -1208.13) 
[Wed May  2 03:29:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:29:31 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:29:31 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May  2 03:29:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May  2 04:48:18 2012] Not generating rmf since there are only 98 counts
[Wed May  2 04:48:18 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:54 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:54 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May  2 05:53:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:59 2012] Using photon index=1.80, rate=0.0173, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src20.arf
[Wed May  2 05:53:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:59 2012] Updating source flux to 3.5e-13
[Wed May  2 05:57:25 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Wed May  2 05:57:25 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting