[Mon Apr 30 19:48:30 2012] Detection parameters:
  Position = (294.3, 362.5) = 5 34 28.87 22 6 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.0 +/- 28.9
  Background counts = 191.3
  Rate = 0.07 +/- 0.007

[Mon Apr 30 19:48:39 2012] Off-axis axis estimate = 4.65'
[Mon Apr 30 23:12:58 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 23:12:58 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Mon Apr 30 23:12:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Mon Apr 30 23:12:58 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.76"
[Tue May  1 09:55:15 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12.ximg exists
[Tue May  1 09:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12.csv
[Tue May  1 09:55:15 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May  1 09:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12.csv
[Tue May  1 09:55:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:55:32 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May  1 09:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May  1 09:55:32 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May  1 09:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May  1 09:55:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:46 2012] Warning, spatial fit 12 centroid is now closest to src. 13
[Tue May  1 09:56:46 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:46 2012] Assessing source extent using major
[Tue May  1 09:56:46 2012] Source does appear to be extended
[Tue May  1 09:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:47 2012] Source is confused with source 11
[Tue May  1 14:49:26 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:49:26 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Tue May  1 14:49:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Tue May  1 14:49:26 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.76"
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10.csv
[Wed May  2 01:43:19 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  2 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10.csv
[Wed May  2 01:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  2 01:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  2 01:43:22 2012] fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  2 01:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May  2 01:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:44:06 2012] Warning, spatial fit 10 centroid is now closest to src. 8
[Wed May  2 01:44:06 2012] Spatial fit model total counts = 8493.130000, observed total counts = 6533.000000
[Wed May  2 01:44:06 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 01:44:06 2012] Source 12 is offset by -3.647224 and 5.741709 pixels which is larger than
2 X fitted extent = 1.009844 x 1.009844, not incorporating fit results
[Wed May  2 01:44:07 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:44:07 2012] Assessing source extent using major
[Wed May  2 01:44:07 2012] Source does appear to be extended
[Wed May  2 01:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:00:49 2012] XMMSAS src. selection expression = ellipse(25553.339508, 31489.140717, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 03:00:49 2012] Writing source region out to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12_src.reg
[Wed May  2 03:00:49 2012] Extracting stamp from image fullrun_mos2_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (257, 325) - (332, 400)
[Wed May  2 03:00:50 2012] XMMSAS bgd. selection expression = annulus(25553.339508, 31489.140717, 1087.500000, 2175.000000, X, Y) && !ellipse(26269.000000, 32775.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.440000, 32094.248000, 821.464024, 821.464024, 0.000000, X, Y) && !ellipse(24744.633514, 31581.233063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.670800, 32140.206000, 1594.320046, 654.895219, 0.000000, X, Y) && !ellipse(25649.430328, 32760.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.590576, 31563.861206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23031.143982, 32016.514496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23731.721252, 31573.785706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.930145, 32382.770477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22968.440400, 31504.032000, 1478.472043, 1478.472043, 0.000000, X, Y) && !ellipse(26589.124847, 31532.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25485.748850, 33275.897600, 1045.880030, 1045.880030, 0.000000, X, Y) && !ellipse(23521.344696, 32670.703094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27900.032288, 31343.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.430634, 31612.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.387787, 31964.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.960000, 31440.937800, 1434.752041, 1434.752041, 0.000000, X, Y) && !ellipse(24976.988403, 33262.240967, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 03:00:50 2012] Writing fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12.gif
[Wed May  2 03:19:00 2012] Mean detx,y = (576.54, -7282.66) 
[Wed May  2 03:19:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 03:19:15 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 03:19:15 2012] Setting source spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May  2 03:19:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed May  2 04:20:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  2 04:20:14 2012] rmf not generated due to insufficient counts
[Wed May  2 05:53:53 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:53 2012] Error reading totcts from fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May  2 05:53:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:59 2012] Using photon index=1.80, rate=0.0745, arf fullrun_mos2_xmm0412591101_pi300-10000_pass1_cl_src12.arf
[Wed May  2 05:53:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:59 2012] Updating source flux to 1.2e-12
[Wed May  2 05:57:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting