[Mon Apr 30 19:48:25 2012] Detection parameters:
  Position = (282.0, 202.5) = 5 34 32.72 21 55 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.7 +/- 31.7
  Background counts = 217.7
  Rate = 0.09 +/- 0.008

[Mon Apr 30 19:48:28 2012] Off-axis axis estimate = 7.06'
[Mon Apr 30 19:51:02 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 19:51:02 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Mon Apr 30 19:51:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Mon Apr 30 19:51:02 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.96"
[Mon Apr 30 23:12:56 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Apr 30 23:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6.csv
[Mon Apr 30 23:12:56 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Apr 30 23:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6.csv
[Mon Apr 30 23:12:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 23:12:57 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Apr 30 23:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Apr 30 23:12:57 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Apr 30 23:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Apr 30 23:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:14 2012] Spatial fit model total counts = 4852.220000, observed total counts = 3231.000000
[Tue May  1 09:56:15 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  1 09:56:15 2012] Spatial fit model total counts = 3680.710000, observed total counts = 3674.000000
[Tue May  1 09:56:15 2012] Offset between fit and detection position for source 7 = 2.392186 pixels
[Tue May  1 09:56:15 2012] Warning, changing simple spatial fit ID from 6 to 7
[Tue May  1 09:56:15 2012] 3711.734000 total counts/ 3211.250000 bgd. counts: snr = 8.831880
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.392186 pixels
  Position = (281.2, 200.3) = 5 34 32.96 21 55 8.6
  Extent = 20.4 (20.1-20.6)", rotation angle = 0
  Source counts = 500.5 +/- 60.9
  Background counts = 3211.2
  Rate = 0.09 +/- 0.01
[Tue May  1 09:56:17 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:17 2012] Assessing source extent using major axis lower bound
[Tue May  1 09:56:17 2012] Source does appear to be extended
[Tue May  1 09:56:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:18 2012] Source is confused with source 2
[Tue May  1 09:57:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 09:57:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 09:57:12 2012] Initial guess for spatial extent in simple fitting = 20.40"
[Tue May  1 09:57:12 2012] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.928
[Tue May  1 09:57:12 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 20.40"
[Tue May  1 14:49:23 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6.ximg exists
[Tue May  1 14:49:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6.csv
[Tue May  1 14:49:23 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May  1 14:49:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6.csv
[Tue May  1 14:49:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 14:49:25 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May  1 14:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May  1 14:49:25 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May  1 14:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May  1 14:49:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:42 2012] Warning, spatial fit 6 centroid is now closest to src. 20
[Wed May  2 01:43:42 2012] Spatial fit model total counts = 3672.720000, observed total counts = 3674.000000
[Wed May  2 01:43:42 2012] Offset between fit and detection position for source 7 = 0.649405 pixels
[Wed May  2 01:43:42 2012] Warning, changing simple spatial fit ID from 6 to 7
[Wed May  2 01:43:42 2012] 3157.348000 total counts/ 2530.690000 bgd. counts: snr = 12.456933
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.649405 pixels
  Position = (281.8, 200.3) = 5 34 32.76 21 55 8.7
  Extent = 20.6 (11.6-41.1)", rotation angle = 0
  Source counts = 626.7 +/- 56.2
  Background counts = 2530.7
  Rate = 0.1 +/- 0.01
[Wed May  2 01:43:42 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:43:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:43:42 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:43:42 2012] Source does appear to be extended
[Wed May  2 01:43:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 01:44:28 2012] XMMSAS src. selection expression = ellipse(24470.426000, 17378.260000, 1233.390035, 1233.390035, 0.000000, X, Y)
[Wed May  2 01:44:28 2012] Writing source region out to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_src.reg
[Wed May  2 01:44:28 2012] Extracting stamp from image fullrun_mos1_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (211, 129) - (353, 271)
[Wed May  2 01:44:28 2012] XMMSAS bgd. selection expression = annulus(24470.426000, 17378.260000, 2055.650059, 4111.300118, X, Y) && !ellipse(23618.678070, 17621.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.003311, 17775.123199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22209.502686, 17719.516266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26292.961639, 17555.111542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.268127, 17646.561371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24237.817627, 16829.899582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.391200, 15700.620200, 854.000025, 854.000025, 0.000000, X, Y) && !ellipse(24466.649292, 13869.421112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25384.572571, 17494.043213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.199440, 15142.058200, 594.660017, 594.660017, 0.000000, X, Y) && !ellipse(19601.251022, 17572.738281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24746.786000, 15699.696000, 1112.560032, 1112.560032, 0.000000, X, Y) && !ellipse(24667.435883, 14741.330078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.518585, 14388.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.038727, 13270.137192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23677.303772, 13335.280991, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 01:44:28 2012] Writing fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7.gif
[Wed May  2 01:47:08 2012] Mean detx,y = (7405.06, -343.81) 
[Wed May  2 01:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 01:47:38 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 01:47:38 2012] Setting source spectrum file to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May  2 01:47:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May  2 05:53:48 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:49 2012] Error reading totcts from fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May  2 05:53:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:51 2012] Using photon index=1.80, rate=0.11, arf fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7.arf
[Wed May  2 05:53:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:51 2012] Updating source flux to 1.6e-12
[Wed May  2 05:54:04 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Wed May  2 05:54:04 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Wed May  2 05:57:25 2012] Reading fit data from xmm0412591101/analysis//spectral/fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_pl.csv
[Wed May  2 05:57:25 2012] Spectral fit parameter nH value = 2.08386e+21
[Wed May  2 05:57:25 2012] Spectral fit parameter PhoIndex value = 2.17619
[Wed May  2 05:57:25 2012] Failed to get F(0.3-8.0) from xmm0412591101/analysis//spectral/fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Wed May  2 05:57:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:57:25 2012] Using Nh = 2.1e+21, photon index=2.18, rate=0.11, arf fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src7.arf
[Wed May  2 05:57:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:57:25 2012] Updating source flux to 1.5e-12