[Mon Apr 30 19:48:28 2012] Detection parameters:
  Position = (276.5, 89.3) = 5 34 34.43 21 47 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 15.1
  Background counts = 36.9
  Rate = 0.02 +/- 0.003

[Mon Apr 30 19:48:28 2012] Off-axis axis estimate = 15.24'
[Mon Apr 30 19:51:02 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 19:51:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 19:51:02 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Mon Apr 30 19:51:02 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.881
[Mon Apr 30 19:51:02 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 14.05"
[Mon Apr 30 23:12:57 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43.ximg exists
[Mon Apr 30 23:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43.csv
[Mon Apr 30 23:12:57 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Apr 30 23:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43.csv
[Mon Apr 30 23:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 23:12:58 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Apr 30 23:12:58 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Apr 30 23:12:58 2012] Fit fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue May  1 09:56:15 2012] Spatial fit model total counts = 1172.680000, observed total counts = 1169.000000
[Tue May  1 09:56:15 2012] Offset between fit and detection position for source 46 = 4.915605 pixels
[Tue May  1 09:56:15 2012] Warning, changing simple spatial fit ID from 43 to 14
[Tue May  1 09:56:15 2012] 1211.004000 total counts/ 876.214000 bgd. counts: snr = 11.310124
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 4.915605 pixels
  Position = (272.8, 92.6) = 5 34 35.59 21 47 20.1
  Extent = 27.6 (27.6-55.2)", rotation angle = 0
  Source counts = 334.8 +/- 34.8
  Background counts = 876.2
  Rate = 0.06 +/- 0.006
[Tue May  1 09:56:18 2012] Vigneting correction estimate = 1.000000
[Tue May  1 09:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 09:56:18 2012] Assessing source extent using major axis lower bound
[Tue May  1 09:56:18 2012] Source does appear to be extended
[Tue May  1 09:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 09:56:18 2012] Source is confused with source 15
[Tue May  1 09:57:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 09:57:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 09:57:12 2012] Initial guess for spatial extent in simple fitting = 27.62"
[Tue May  1 09:57:12 2012] source mask rpix=6.3, npix_max = 187, mask sum = 182, frac = 0.970
[Tue May  1 09:57:12 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 27.62"
[Tue May  1 14:49:25 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40.ximg exists
[Tue May  1 14:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40.csv
[Tue May  1 14:49:25 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue May  1 14:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40.csv
[Tue May  1 14:49:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 14:49:26 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue May  1 14:49:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue May  1 14:49:26 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue May  1 14:49:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue May  1 14:49:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 01:43:42 2012] Warning, spatial fit 36 centroid is now closest to src. 40
[Wed May  2 01:43:42 2012] Warning, spatial fit 40 centroid is now closest to src. 16
[Wed May  2 01:43:42 2012] Vigneting correction estimate = 1.000000
[Wed May  2 01:43:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 01:43:42 2012] Assessing source extent using major axis lower bound
[Wed May  2 01:43:42 2012] Source does appear to be extended
[Wed May  2 01:43:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 01:44:06 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Wed May  2 01:44:06 2012] Warning, spatial fit 31 centroid is now closest to src. 10
[Wed May  2 01:44:06 2012] Warning, spatial fit 36 centroid is now closest to src. 58
[Wed May  2 01:44:07 2012] Warning, spatial fit 61 centroid is now closest to src. 52
[Wed May  2 01:44:07 2012] Warning, spatial fit 65 centroid is now closest to src. 47
[Wed May  2 01:44:07 2012] Warning, spatial fit 68 centroid is now closest to src. 49
[Wed May  2 01:44:29 2012] XMMSAS src. selection expression = ellipse(23681.528000, 8006.406000, 1657.182048, 1657.182048, 0.000000, X, Y)
[Wed May  2 01:44:29 2012] Writing source region out to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46_src.reg
[Wed May  2 01:44:29 2012] Extracting stamp from image fullrun_mos1_xmm0412591101_pi300-10000_cl_sm2.00.img.gz, (178, 0) - (368, 188)
[Wed May  2 01:44:29 2012] XMMSAS bgd. selection expression = annulus(23681.528000, 8006.406000, 2761.970079, 5523.940159, X, Y) && !ellipse(24466.649292, 13869.421112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24312.323059, 12394.957230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24397.432678, 11958.149155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.566600, 10721.316000, 2083.448060, 2083.448060, 0.000000, X, Y) && !ellipse(23993.637238, 8304.986153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24100.172000, 8715.128000, 2147.800062, 2147.800062, 0.000000, X, Y) && !ellipse(24277.492000, 9188.322000, 2194.624063, 2194.624063, 0.000000, X, Y) && !ellipse(24224.518585, 14388.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.038727, 13270.137192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23677.303772, 13335.280991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.372000, 11394.736000, 1837.432053, 1619.848047, 91.378000, X, Y) && !ellipse(23529.775400, 9676.471400, 2127.424061, 2127.424061, 0.000000, X, Y) && !ellipse(24528.795563, 8479.742172, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 01:44:29 2012] Writing fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46.gif
[Wed May  2 02:03:34 2012] Mean detx,y = (16063.02, -257.02) 
[Wed May  2 02:03:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 02:04:21 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 02:04:21 2012] Setting source spectrum file to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May  2 02:04:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed May  2 05:53:51 2012] Updating aperture counts using extracted products
[Wed May  2 05:53:51 2012] Error reading totcts from fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed May  2 05:53:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 05:53:53 2012] Using photon index=1.80, rate=0.0587, arf fullrun_mos1_xmm0412591101_pi300-10000_pass1_cl_src46.arf
[Wed May  2 05:53:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 05:53:53 2012] Updating source flux to 1.7e-12
[Wed May  2 05:54:04 2012] Flag c found in src. 46 procflags, skipping spectral fitting