[Mon Apr 30 19:48:27 2012] Detection parameters:
  Position = (203.2, 266.9) = 5 34 57.34 21 59 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.8 +/- 31.3
  Background counts = 193.5
  Rate = 0.04 +/- 0.007

[Mon Apr 30 19:48:28 2012] Off-axis axis estimate = 7.27'
[Mon Apr 30 19:51:02 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 19:51:02 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Apr 30 19:51:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.137
[Mon Apr 30 19:51:02 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.06"
[Mon Apr 30 23:12:56 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Apr 30 23:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29.csv
[Mon Apr 30 23:12:56 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Apr 30 23:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29.csv
[Mon Apr 30 23:12:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 23:12:58 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Apr 30 23:12:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Apr 30 23:12:58 2012] fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Apr 30 23:12:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Apr 30 23:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 09:56:16 2012] Spatial fit model total counts = 2531.730000, observed total counts = 2370.000000
[Tue May  1 09:56:16 2012] Offset between fit and detection position for source 32 = 0.766746 pixels
[Tue May  1 09:56:16 2012] Warning, changing simple spatial fit ID from 29 to 28
[Tue May  1 09:56:16 2012] 2551.460600 total counts/ 2527.570000 bgd. counts: snr = 0.475199
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.766746 pixels
  Position = (202.6, 266.4) = 5 34 57.54 21 59 56.3
  Extent = 2.5" x 2.5", rotation angle = 0
  Source counts = 23.9 +/- 50.5
  Background counts = 2527.6
  Rate = 0.004 +/- 0.009
  Deleting source due to low Poisson probability