[Sat Apr  7 10:10:04 2012] Detection parameters:
  Position = (362.7, 248.0) = 5 34 7.52 21 58 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 380.6 +/- 34.0
  Background counts = 378.7
  Rate = 0.05 +/- 0.004

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 5.92'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.849
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.39"
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37.csv
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37.csv
[Sat Apr  7 23:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Apr  7 23:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:20 2012] Spatial fit model total counts = 5909.560000, observed total counts = 3936.000000
[Sat Apr  7 23:31:20 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 23:31:20 2012] Warning, spatial fit 37 centroid is now closest to src. 89
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 89
[Sun Apr  8 08:13:58 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.849
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.39"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37.csv
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37.csv
[Sun Apr  8 14:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Apr  8 14:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 5590.290000, observed total counts = 3936.000000
[Sun Apr  8 14:22:17 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:17 2012] Warning, spatial fit 37 centroid is now closest to src. 85
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:31 2012] XMMSAS src. selection expression = ellipse(31505.535522, 21526.120712, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88_src.reg
[Sun Apr  8 16:44:31 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (325, 210) - (400, 285)
[Sun Apr  8 16:44:31 2012] XMMSAS bgd. selection expression = annulus(31505.535522, 21526.120712, 1087.500000, 2175.000000, X, Y) && !ellipse(31524.128693, 22480.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31526.446533, 23435.743896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31546.101715, 22131.793961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.784821, 23966.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31553.780060, 20953.830475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32030.540000, 20462.390000, 829.488024, 234.872007, 157.923000, X, Y) && !ellipse(32109.636993, 22629.692932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32010.874000, 21579.918000, 1573.160045, 1573.160045, 0.000000, X, Y) && !ellipse(32394.326620, 25005.385000, 1463.936042, 1463.936042, 0.000000, X, Y) && !ellipse(33003.414000, 24176.674000, 1481.176043, 1481.176043, 0.000000, X, Y) && !ellipse(31494.867615, 24482.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.188293, 19424.118088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31510.694000, 19876.876000, 1201.880035, 1201.880035, 0.000000, X, Y) && !ellipse(32748.699890, 21614.857101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32117.259583, 19627.114990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33330.940000, 24858.772000, 1506.384043, 1506.384043, 0.000000, X, Y) && !ellipse(32739.064789, 20131.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33116.801117, 19828.161774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33428.982117, 21899.200119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32105.822000, 18843.502000, 1614.840046, 559.891216, 0.000000, X, Y) && !ellipse(32545.950000, 19344.048000, 1617.376047, 1049.128030, 25.447000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88.gif
[Sun Apr  8 16:56:37 2012] Mean detx,y = (7159.68, 2427.51) 
[Sun Apr  8 16:56:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 16:56:44 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 16:56:44 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun Apr  8 16:56:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Sun Apr  8 18:00:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 18:00:24 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun Apr  8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:18 2012] Using photon index=1.80, rate=0.0479, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src88.arf
[Sun Apr  8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:18 2012] Updating source flux to 1.1e-12
[Sun Apr  8 19:32:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting