[Sat Apr  7 10:10:04 2012] Detection parameters:
  Position = (367.5, 313.0) = 5 34 6.00 22 3 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.7 +/- 32.4
  Background counts = 437.7
  Rate = 0.03 +/- 0.004

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 5.12'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.139
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 8.99"
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72.csv
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72_1.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72.csv
[Sat Apr  7 23:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sat Apr  7 23:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sat Apr  7 23:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sat Apr  7 23:30:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:21 2012] Spatial fit model total counts = 5727.050000, observed total counts = 4108.000000
[Sat Apr  7 23:31:21 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 61
[Sun Apr  8 08:13:58 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.139
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 8.99"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69.csv
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69.csv
[Sun Apr  8 14:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sun Apr  8 14:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 6829.670000, observed total counts = 4108.000000
[Sun Apr  8 14:22:17 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:32 2012] XMMSAS src. selection expression = ellipse(31923.814148, 27185.255920, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  8 16:44:32 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63_src.reg
[Sun Apr  8 16:44:32 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (330, 276) - (405, 351)
[Sun Apr  8 16:44:32 2012] XMMSAS bgd. selection expression = annulus(31923.814148, 27185.255920, 1087.500000, 2175.000000, X, Y) && !ellipse(31829.568573, 25095.946991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31938.188477, 25965.848755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.000000, 28215.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32394.326620, 25005.385000, 1463.936042, 1463.936042, 0.000000, X, Y) && !ellipse(32159.588715, 28735.272644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33003.414000, 24176.674000, 1481.176043, 1481.176043, 0.000000, X, Y) && !ellipse(31494.867615, 24482.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32604.686000, 28277.782000, 1538.848044, 1538.848044, 0.000000, X, Y) && !ellipse(32441.682922, 26566.965973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32745.922000, 26047.086600, 1316.280038, 1316.280038, 0.000000, X, Y) && !ellipse(33330.940000, 24858.772000, 1506.384043, 1506.384043, 0.000000, X, Y) && !ellipse(33705.130000, 28834.824000, 3009.344087, 3009.344087, 0.000000, X, Y) && !ellipse(31578.729370, 27598.893555, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:32 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63.gif
[Sun Apr  8 17:03:34 2012] Mean detx,y = (7206.00, -3208.40) 
[Sun Apr  8 17:03:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 17:03:41 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 17:03:41 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun Apr  8 17:03:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sun Apr  8 18:33:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 18:33:01 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:17 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:17 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun Apr  8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:18 2012] Using photon index=1.80, rate=0.0281, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src63.arf
[Sun Apr  8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:18 2012] Updating source flux to 5.3e-13
[Sun Apr  8 19:32:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting