[Sat Apr  7 10:10:04 2012] Detection parameters:
  Position = (264.9, 374.9) = 5 34 38.10 22 7 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.2 +/- 34.8
  Background counts = 407.6
  Rate = 0.05 +/- 0.004

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 6.05'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.119
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.46"
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29.csv
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29.csv
[Sat Apr  7 23:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Apr  7 23:30:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Apr  7 23:31:20 2012] Source 40 is offset by -1.580157 and 7.194980 pixels which is larger than
2 X fitted extent = 2.439618 x 2.439618, not incorporating fit results
[Sat Apr  7 23:31:21 2012] Spatial fit model total counts = 4897.000000, observed total counts = 5066.000000
[Sat Apr  7 23:31:21 2012] Offset between fit and detection position for source 40 = 4.037357 pixels
[Sat Apr  7 23:31:21 2012] Warning, changing simple spatial fit ID from 29 to 79
[Sat Apr  7 23:31:21 2012] 4324.830000 total counts/ 2792.750000 bgd. counts: snr = 28.991148
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.037357 pixels
  Position = (268.4, 372.8) = 5 34 37.02 22 7 38.9
  Extent = 18.9 (18.9-18.9)", rotation angle = 0
  Source counts = 1532.1 +/- 65.8
  Background counts = 2792.8
  Rate = 0.1 +/- 0.005
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 54
[Sat Apr  7 23:31:21 2012] Source is confused with source 42
[Sat Apr  7 23:31:21 2012] Source is confused with source 52
[Sat Apr  7 23:31:21 2012] Source is confused with source 35
[Sun Apr  8 08:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 18.93"
[Sun Apr  8 08:13:58 2012] source mask rpix=4.4, npix_max = 94, mask sum = 82, frac = 0.871
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 18.93"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29.csv
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29.csv
[Sun Apr  8 14:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Apr  8 14:21:50 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 9724.170000, observed total counts = 6091.000000
[Sun Apr  8 14:22:17 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:17 2012] Warning, spatial fit 29 centroid is now closest to src. 42
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 12040.300000, observed total counts = 12111.000000
[Sun Apr  8 14:22:17 2012] Offset between fit and detection position for source 40 = 3.155286 pixels
[Sun Apr  8 14:22:17 2012] Warning, changing simple spatial fit ID from 29 to 46
[Sun Apr  8 14:22:17 2012] 11953.273000 total counts/ 11618.700000 bgd. counts: snr = 3.103931
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 3.155286 pixels
  Position = (267.4, 369.8) = 5 34 37.33 22 7 25.8
  Extent = 16.4 (13.9-19.3)", rotation angle = 0
  Source counts = 334.6 +/- 109.3
  Background counts = 11618.7
  Rate = 0.03 +/- 0.008
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:31 2012] XMMSAS src. selection expression = ellipse(23213.144000, 32122.300000, 984.768028, 984.768028, 0.000000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40_src.reg
[Sun Apr  8 16:44:31 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (211, 313) - (324, 426)
[Sun Apr  8 16:44:31 2012] XMMSAS bgd. selection expression = annulus(23213.144000, 32122.300000, 1641.280047, 3282.560094, X, Y) && !ellipse(25438.735168, 31490.595673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.234039, 31528.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.190643, 31566.508270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.220856, 31784.980011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24451.425354, 32337.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.580597, 32221.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.080000, 33081.699720, 1143.904033, 1143.904033, 0.000000, X, Y) && !ellipse(23969.633118, 32395.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.381531, 32832.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.526000, 32809.630000, 1510.256043, 1510.256043, 0.000000, X, Y) && !ellipse(21619.916000, 31951.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(23756.776000, 33604.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(22435.958099, 31653.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.201370, 32001.524200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.364990, 33517.644165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25995.014000, 33243.430000, 1490.344043, 1490.344043, 0.000000, X, Y) && !ellipse(23503.888000, 32726.948000, 1479.656043, 1479.656043, 0.000000, X, Y) && !ellipse(20795.479832, 32198.898000, 1099.144032, 1099.144032, 0.000000, X, Y) && !ellipse(26651.841949, 32664.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.200000, 32119.362000, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(27331.409973, 32691.555695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24662.861267, 33279.511932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26714.336000, 34849.226000, 2980.688086, 2980.688086, 0.000000, X, Y) && !ellipse(25317.987091, 34394.573792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20189.715698, 31946.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.994690, 33860.461548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.497040, 34273.671722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19565.766556, 31813.415375, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40.gif
[Sun Apr  8 16:55:07 2012] Mean detx,y = (-1828.43, -7603.61) 
[Sun Apr  8 16:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 16:55:15 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 16:55:15 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Apr  8 16:55:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Apr  8 19:28:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Apr  8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:18 2012] Using photon index=1.80, rate=0.025, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src40.arf
[Sun Apr  8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:18 2012] Updating source flux to 4.3e-13
[Sun Apr  8 19:32:43 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Sun Apr  8 19:32:43 2012] Flag p found in src. 40 procflags, skipping spectral fitting
[Sun Apr  8 19:32:43 2012] Flag c found in src. 40 procflags, skipping spectral fitting