[Sat Apr  7 10:10:04 2012] Detection parameters:
  Position = (292.7, 378.0) = 5 34 29.41 22 8 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 472.8 +/- 39.2
  Background counts = 370.0
  Rate = 0.05 +/- 0.005

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 5.78'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.895
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.32"
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28.csv
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28.csv
[Sat Apr  7 23:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Apr  7 23:30:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Apr  7 23:31:20 2012] Spatial fit model total counts = 6012.590000, observed total counts = 5590.000000
[Sat Apr  7 23:31:20 2012] Offset between fit and detection position for source 39 = 2.237453 pixels
[Sat Apr  7 23:31:20 2012] 5491.955000 total counts/ 5148.670000 bgd. counts: snr = 4.784178
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.237453 pixels
  Position = (293.8, 380.0) = 5 34 29.07 22 8 10.1
  Extent = 9.5 (7.4-18.6)", rotation angle = 0
  Source counts = 343.3 +/- 74.1
  Background counts = 5148.7
  Rate = 0.03 +/- 0.006
[Sat Apr  7 23:31:21 2012] Spatial fit model total counts = 5324.060000, observed total counts = 4755.000000
[Sat Apr  7 23:31:21 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 31
[Sat Apr  7 23:31:21 2012] Source is confused with source 34
[Sun Apr  8 08:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 9.50"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.041
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 9.50"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28.csv
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28.csv
[Sun Apr  8 14:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Apr  8 14:21:50 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 5630.690000, observed total counts = 5264.000000
[Sun Apr  8 14:22:17 2012] Offset between fit and detection position for source 39 = 1.635688 pixels
[Sun Apr  8 14:22:17 2012] 5430.755000 total counts/ 4817.790000 bgd. counts: snr = 8.831038
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.635688 pixels
  Position = (295.2, 380.8) = 5 34 28.63 22 8 13.8
  Extent = 14.3 (10.2-19.0)", rotation angle = 0
  Source counts = 613.0 +/- 73.7
  Background counts = 4817.8
  Rate = 0.05 +/- 0.006
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 5298.080000, observed total counts = 4755.000000
[Sun Apr  8 14:22:17 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:31 2012] XMMSAS src. selection expression = ellipse(25632.080000, 33081.699720, 857.928025, 857.928025, 0.000000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39_src.reg
[Sun Apr  8 16:44:31 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (246, 332) - (344, 430)
[Sun Apr  8 16:44:31 2012] XMMSAS bgd. selection expression = annulus(25632.080000, 33081.699720, 1429.880041, 2859.760082, X, Y) && !ellipse(27788.680359, 32226.811401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.735168, 31490.595673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.234039, 31528.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.190643, 31566.508270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.220856, 31784.980011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24451.425354, 32337.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.580597, 32221.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.144000, 32122.300000, 1313.024038, 1313.024038, 0.000000, X, Y) && !ellipse(23969.633118, 32395.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.381531, 32832.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.526000, 32809.630000, 1510.256043, 1510.256043, 0.000000, X, Y) && !ellipse(21619.916000, 31951.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(23756.776000, 33604.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(22435.958099, 31653.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.201370, 32001.524200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.999542, 31436.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.364990, 33517.644165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25995.014000, 33243.430000, 1490.344043, 1490.344043, 0.000000, X, Y) && !ellipse(23503.888000, 32726.948000, 1479.656043, 1479.656043, 0.000000, X, Y) && !ellipse(28953.234619, 31312.995453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.841949, 32664.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.200000, 32119.362000, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(28282.762726, 31309.798798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27331.409973, 32691.555695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24662.861267, 33279.511932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26714.336000, 34849.226000, 2980.688086, 2980.688086, 0.000000, X, Y) && !ellipse(29269.878723, 31426.450165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25317.987091, 34394.573792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.018000, 32009.666400, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(25050.994690, 33860.461548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.497040, 34273.671722, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:31 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39.gif
[Sun Apr  8 16:54:53 2012] Mean detx,y = (548.52, -8721.98) 
[Sun Apr  8 16:54:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 16:55:01 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 16:55:01 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Apr  8 16:55:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Apr  8 19:28:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Apr  8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:18 2012] Using photon index=1.80, rate=0.0459, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src39.arf
[Sun Apr  8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:18 2012] Updating source flux to 7.8e-13
[Sun Apr  8 19:32:43 2012] Flag p found in src. 39 procflags, skipping spectral fitting
[Sun Apr  8 19:32:43 2012] Flag c found in src. 39 procflags, skipping spectral fitting