[Sat Apr  7 10:10:04 2012] Detection parameters:
  Position = (270.9, 377.7) = 5 34 36.23 22 8 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.0 +/- 26.6
  Background counts = 343.9
  Rate = 0.03 +/- 0.003

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 6.09'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.907
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 9.47"
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79.csv
[Sat Apr  7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79_1.ximg exists
[Sat Apr  7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79.csv
[Sat Apr  7 23:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sat Apr  7 23:30:52 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sat Apr  7 23:31:20 2012] Spatial fit model total counts = 5779.120000, observed total counts = 5841.000000
[Sat Apr  7 23:31:20 2012] Offset between fit and detection position for source 35 = 1.558571 pixels
[Sat Apr  7 23:31:20 2012] Warning, changing simple spatial fit ID from 79 to 31
[Sat Apr  7 23:31:20 2012] 5282.143000 total counts/ 4394.990000 bgd. counts: snr = 13.381955
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.558571 pixels
  Position = (270.8, 376.2) = 5 34 36.28 22 7 53.7
  Extent = 18.5 (18.5-37.0)", rotation angle = 0
  Source counts = 887.2 +/- 72.7
  Background counts = 4395.0
  Rate = 0.07 +/- 0.005
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 46
[Sun Apr  8 08:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 18.50"
[Sun Apr  8 08:13:58 2012] source mask rpix=4.3, npix_max = 90, mask sum = 89, frac = 0.985
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 18.50"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src74.ximg exists
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src74_1.ximg exists
[Sun Apr  8 14:21:49 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src74 appears to have run properly
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sun Apr  8 14:21:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 5791.460000, observed total counts = 5841.000000
[Sun Apr  8 14:22:17 2012] Offset between fit and detection position for source 35 = 0.548775 pixels
[Sun Apr  8 14:22:17 2012] Warning, changing simple spatial fit ID from 74 to 31
[Sun Apr  8 14:22:17 2012] 5340.909000 total counts/ 4381.060000 bgd. counts: snr = 14.501513
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.548775 pixels
  Position = (270.7, 376.7) = 5 34 36.29 22 7 56.1
  Extent = 18.5 (18.5-37.0)", rotation angle = 0
  Source counts = 959.8 +/- 73.1
  Background counts = 4381.1
  Rate = 0.07 +/- 0.005
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:32 2012] XMMSAS src. selection expression = ellipse(23503.888000, 32726.948000, 1109.742032, 1109.742032, 0.000000, X, Y)
[Sun Apr  8 16:44:32 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35_src.reg
[Sun Apr  8 16:44:32 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (207, 313) - (334, 441)
[Sun Apr  8 16:44:33 2012] XMMSAS bgd. selection expression = annulus(23503.888000, 32726.948000, 1849.570053, 3699.140106, X, Y) && !ellipse(27788.680359, 32226.811401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.735168, 31490.595673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.234039, 31528.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.190643, 31566.508270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.220856, 31784.980011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24451.425354, 32337.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.580597, 32221.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.080000, 33081.699720, 1143.904033, 1143.904033, 0.000000, X, Y) && !ellipse(23213.144000, 32122.300000, 1313.024038, 1313.024038, 0.000000, X, Y) && !ellipse(23969.633118, 32395.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.381531, 32832.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.526000, 32809.630000, 1510.256043, 1510.256043, 0.000000, X, Y) && !ellipse(21619.916000, 31951.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(23756.776000, 33604.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(22435.958099, 31653.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.201370, 32001.524200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.999542, 31436.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.364990, 33517.644165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25995.014000, 33243.430000, 1490.344043, 1490.344043, 0.000000, X, Y) && !ellipse(20795.479832, 32198.898000, 1099.144032, 1099.144032, 0.000000, X, Y) && !ellipse(26651.841949, 32664.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.200000, 32119.362000, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(27331.409973, 32691.555695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24662.861267, 33279.511932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26714.336000, 34849.226000, 2980.688086, 2980.688086, 0.000000, X, Y) && !ellipse(25317.987091, 34394.573792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20189.715698, 31946.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.018000, 32009.666400, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(25050.994690, 33860.461548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.497040, 34273.671722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19565.766556, 31813.415375, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:33 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35.gif
[Sun Apr  8 17:04:42 2012] Mean detx,y = (-1582.37, -8174.65) 
[Sun Apr  8 17:04:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 17:04:50 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 17:04:50 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Apr  8 17:04:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Apr  8 19:28:17 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:17 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Apr  8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:18 2012] Using photon index=1.80, rate=0.0719, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src35.arf
[Sun Apr  8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:18 2012] Updating source flux to 1.2e-12
[Sun Apr  8 19:32:43 2012] Flag c found in src. 35 procflags, skipping spectral fitting