[Sat Apr  7 10:10:03 2012] Detection parameters:
  Position = (293.0, 362.5) = 5 34 29.32 22 6 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 836.0 +/- 45.9
  Background counts = 442.0
  Rate = 0.09 +/- 0.005

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 4.66'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.949
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.76"
[Sat Apr  7 23:30:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6.ximg exists
[Sat Apr  7 23:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6.csv
[Sat Apr  7 23:30:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Apr  7 23:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6.csv
[Sat Apr  7 23:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Apr  7 23:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:20 2012] Warning, spatial fit 6 centroid is now closest to src. 53
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 08:13:58 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.949
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.76"
[Sun Apr  8 14:21:48 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src6.ximg exists
[Sun Apr  8 14:21:48 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Apr  8 14:21:48 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Apr  8 14:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:17 2012] Warning, spatial fit 6 centroid is now closest to src. 36
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:30 2012] XMMSAS src. selection expression = ellipse(25438.735168, 31490.595673, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  8 16:44:30 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2_src.reg
[Sun Apr  8 16:44:30 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (255, 325) - (330, 400)
[Sun Apr  8 16:44:30 2012] XMMSAS bgd. selection expression = annulus(25438.735168, 31490.595673, 1087.500000, 2175.000000, X, Y) && !ellipse(27788.680359, 32226.811401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.234039, 31528.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.190643, 31566.508270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.220856, 31784.980011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24451.425354, 32337.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.580597, 32221.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.080000, 33081.699720, 1143.904033, 1143.904033, 0.000000, X, Y) && !ellipse(23213.144000, 32122.300000, 1313.024038, 1313.024038, 0.000000, X, Y) && !ellipse(23969.633118, 32395.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.381531, 32832.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.526000, 32809.630000, 1510.256043, 1510.256043, 0.000000, X, Y) && !ellipse(23756.776000, 33604.146200, 1541.736044, 1541.736044, 0.000000, X, Y) && !ellipse(22435.958099, 31653.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.999542, 31436.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.364990, 33517.644165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25995.014000, 33243.430000, 1490.344043, 1490.344043, 0.000000, X, Y) && !ellipse(23503.888000, 32726.948000, 1479.656043, 1479.656043, 0.000000, X, Y) && !ellipse(26651.841949, 32664.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.200000, 32119.362000, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(28282.762726, 31309.798798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27331.409973, 32691.555695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24662.861267, 33279.511932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26714.336000, 34849.226000, 2980.688086, 2980.688086, 0.000000, X, Y) && !ellipse(25317.987091, 34394.573792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.018000, 32009.666400, 1438.624041, 1438.624041, 0.000000, X, Y) && !ellipse(25050.994690, 33860.461548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.497040, 34273.671722, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:30 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2.gif
[Sun Apr  8 16:46:58 2012] Mean detx,y = (452.73, -7264.13) 
[Sun Apr  8 16:46:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 16:47:06 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 16:47:06 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Apr  8 16:47:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Apr  8 17:30:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 17:30:49 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Apr  8 19:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:17 2012] Using photon index=1.80, rate=0.0876, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src2.arf
[Sun Apr  8 19:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:17 2012] Updating source flux to 1.4e-12
[Sun Apr  8 19:32:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting