[Sat Apr  7 10:10:05 2012] Detection parameters:
  Position = (295.3, 189.6) = 5 34 28.57 21 54 23.1
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 281.3 +/- 39.2
  Background counts = 1418.7
  Rate = 0.02 +/- 0.003

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 7.90'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.601
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 10.38"
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src94.ximg exists
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src94_1.ximg exists
[Sat Apr  7 23:30:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src94 appears to have run properly
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Sat Apr  7 23:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Sat Apr  7 23:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sat Apr  7 23:30:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:21 2012] Source 114 is offset by 6.837243 and -4.272829 pixels which is larger than
2 X fitted extent = 6.508138 x 2.889462, not incorporating fit results
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 8
[Sun Apr  8 08:13:58 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.601
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 88 for pass 1, mean size = 10.38"
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88.csv
[Sun Apr  8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88_1.ximg exists
[Sun Apr  8 14:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88.csv
[Sun Apr  8 14:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sun Apr  8 14:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:17 2012] Warning, spatial fit 88 centroid is now closest to src. 7
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:33 2012] XMMSAS src. selection expression = ellipse(25646.892120, 16444.711914, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:33 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114_src.reg
[Sun Apr  8 16:44:33 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (220, 115) - (370, 265)
[Sun Apr  8 16:44:33 2012] XMMSAS bgd. selection expression = annulus(25646.892120, 16444.711914, 2175.000000, 4350.000000, X, Y) && !ellipse(24561.521454, 17478.762192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.578200, 15134.825200, 549.117616, 549.117616, 0.000000, X, Y) && !ellipse(24541.420000, 14398.928000, 659.440019, 659.440019, 0.000000, X, Y) && !ellipse(24768.158000, 16881.758000, 924.808027, 924.808027, 0.000000, X, Y) && !ellipse(24131.810272, 16909.919510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.912445, 17370.981277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24477.473846, 13436.137589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.030000, 12368.690000, 555.129616, 555.129616, 0.000000, X, Y) && !ellipse(21593.918600, 17760.400400, 1652.048048, 1652.048048, 0.000000, X, Y) && !ellipse(20501.693588, 17615.396637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24234.894440, 11263.763412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.528400, 15305.959800, 1023.656029, 1023.656029, 0.000000, X, Y) && !ellipse(24386.209869, 13853.052856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.926000, 15985.748000, 651.989619, 651.989619, 0.000000, X, Y) && !ellipse(24000.540314, 12913.836243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23988.937836, 14967.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.087800, 11686.688000, 1283.456037, 246.168007, 102.290000, X, Y) && !ellipse(23594.518000, 14260.056000, 1346.568039, 1346.568039, 0.000000, X, Y) && !ellipse(23917.995453, 11945.963898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24461.068420, 14708.573654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23721.624176, 12393.596527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.328000, 17409.366800, 1754.264050, 1754.264050, 0.000000, X, Y) && !ellipse(22502.492600, 17545.278460, 740.427221, 740.427221, 0.000000, X, Y) && !ellipse(21026.371185, 17616.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.894882, 16918.148773, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:33 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114.gif
[Sun Apr  8 17:08:22 2012] Mean detx,y = (1271.26, 7793.49) 
[Sun Apr  8 17:08:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 17:08:36 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 17:08:36 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114_src_b10.pi.gz
[Sun Apr  8 17:08:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114_bgd.pi.gz
[Sun Apr  8 18:57:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 18:57:35 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:17 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:17 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114_src_b10.pi.gz
[Sun Apr  8 19:28:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:19 2012] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src114.arf
[Sun Apr  8 19:28:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:19 2012] Updating source flux to 4.3e-13
[Sun Apr  8 19:32:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting