[Sat Apr 7 10:10:05 2012] Detection parameters: Position = (273.5, 133.0) = 5 34 35.40 21 50 18.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 424.1 +/- 33.3 Background counts = 133.9 Rate = 0.03 +/- 0.002 [Sat Apr 7 10:10:05 2012] Off-axis axis estimate = 12.13' [Sat Apr 7 17:12:44 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting [Sat Apr 7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 12.49" [Sat Apr 7 17:12:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924 [Sat Apr 7 17:12:44 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 12.49" [Sat Apr 7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59.ximg exists [Sat Apr 7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59.csv [Sat Apr 7 23:30:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59_1.ximg exists [Sat Apr 7 23:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59.csv [Sat Apr 7 23:30:50 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Apr 7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src59.ximg exists [Sat Apr 7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists [Sat Apr 7 23:30:52 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly [Sat Apr 7 23:31:20 2012] Source 113 is offset by 5.760284 and -3.233230 pixels which is larger than 2 X fitted extent = 1.469821 x 1.469821, not incorporating fit results [Sat Apr 7 23:31:20 2012] Source 113 is offset by 1.206879 and -2.526816 pixels which is larger than 2 X fitted extent = 1.477669 x 1.477669, not incorporating fit results [Sat Apr 7 23:31:21 2012] Warning, spatial fit 59 centroid is now closest to src. 16 [Sat Apr 7 23:31:21 2012] Vigneting correction estimate = 1.000000 [Sat Apr 7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Apr 7 23:31:21 2012] Assessing source extent using major [Sat Apr 7 23:31:21 2012] Source does appear to be extended [Sat Apr 7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Apr 7 23:31:21 2012] Source is confused with source 18 [Sat Apr 7 23:31:21 2012] Source is confused with source 17 [Sun Apr 8 08:13:58 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting [Sun Apr 8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 12.49" [Sun Apr 8 08:13:58 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924 [Sun Apr 8 08:13:58 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 12.49" [Sun Apr 8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src56.ximg exists [Sun Apr 8 14:21:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src56_1.ximg exists [Sun Apr 8 14:21:49 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src56 appears to have run properly [Sun Apr 8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src56.ximg exists [Sun Apr 8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists [Sun Apr 8 14:21:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly [Sun Apr 8 14:22:17 2012] Source 113 is offset by 5.760284 and -3.233230 pixels which is larger than 2 X fitted extent = 1.469821 x 1.469821, not incorporating fit results [Sun Apr 8 14:22:17 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 113 at 12.282466 pixels away [Sun Apr 8 14:22:17 2012] Warning, spatial fit 56 centroid is now closest to src. 19 [Sun Apr 8 14:22:17 2012] Spatial fit model total counts = 4536.980000, observed total counts = 4461.000000 [Sun Apr 8 14:22:17 2012] Offset between fit and detection position for source 113 = 1.879062 pixels [Sun Apr 8 14:22:17 2012] Warning, changing simple spatial fit ID from 56 to 62 [Sun Apr 8 14:22:17 2012] 4373.060000 total counts/ 4235.870000 bgd. counts: snr = 2.107906 Spatial fit parameters: Offset between fit and detection position for source 113 = 1.879062 pixels Position = (273.2, 134.9) = 5 34 35.48 21 50 24.1 Extent = 16.0 (10.0-24.6)", rotation angle = 102 (95-109) degrees Source counts = 137.2 +/- 66.1 Background counts = 4235.9 Rate = 0.01 +/- 0.005 [Sun Apr 8 14:22:17 2012] Vigneting correction estimate = 1.000000 [Sun Apr 8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Apr 8 14:22:17 2012] Assessing source extent using major axis lower bound [Sun Apr 8 14:22:17 2012] Source does appear to be extended [Sun Apr 8 14:22:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.17 [Sun Apr 8 14:22:17 2012] Source is asymmetric [Sun Apr 8 16:44:32 2012] XMMSAS src. selection expression = ellipse(23724.087800, 11686.688000, 962.592028, 184.626005, 102.290000, X, Y) [Sun Apr 8 16:44:32 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113_src.reg [Sun Apr 8 16:44:32 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (218, 80) - (329, 190) [Sun Apr 8 16:44:32 2012] XMMSAS bgd. selection expression = annulus(23724.087800, 11686.688000, 1604.320046, 3208.640092, X, Y) && !ellipse(24475.578200, 15134.825200, 549.117616, 549.117616, 0.000000, X, Y) && !ellipse(24541.420000, 14398.928000, 659.440019, 659.440019, 0.000000, X, Y) && !ellipse(24477.473846, 13436.137589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.030000, 12368.690000, 555.129616, 555.129616, 0.000000, X, Y) && !ellipse(24314.147064, 10738.464539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24240.685000, 9656.910000, 2063.104059, 834.872024, 86.856000, X, Y) && !ellipse(24132.402344, 9440.940437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24234.894440, 11263.763412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.363416, 8627.348793, 1222.640298, 852.742875, 67.813969, X, Y) && !ellipse(25035.528400, 15305.959800, 1023.656029, 1023.656029, 0.000000, X, Y) && !ellipse(24386.209869, 13853.052856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.754242, 7916.109322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24000.540314, 12913.836243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23988.937836, 14967.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.569092, 10653.996109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23594.518000, 14260.056000, 1346.568039, 1346.568039, 0.000000, X, Y) && !ellipse(23632.739105, 9268.848740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.995453, 11945.963898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23711.051849, 10214.114174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24461.068420, 14708.573654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23721.624176, 12393.596527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25646.892120, 16444.711914, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23453.033447, 7884.309372, 870.000000, 870.000000, 0.000000, X, Y) [Sun Apr 8 16:44:32 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113.gif [Sun Apr 8 17:00:48 2012] Mean detx,y = (-213.00, 12664.11) [Sun Apr 8 17:00:49 2012] Setting backscal keywords in source and bgd. spectrum [Sun Apr 8 17:00:56 2012] Binned source spectrum to 10 counts/bin [Sun Apr 8 17:00:56 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113_src_b10.pi.gz [Sun Apr 8 17:00:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113_bgd.pi.gz [Sun Apr 8 19:28:16 2012] Updating aperture counts using extracted products [Sun Apr 8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113_src_b10.pi.gz [Sun Apr 8 19:28:18 2012] Calculating source flux in energy range 0.30-8.00 [Sun Apr 8 19:28:18 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src113.arf [Sun Apr 8 19:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Apr 8 19:28:18 2012] Updating source flux to 3.8e-13 [Sun Apr 8 19:32:43 2012] Flag b found in src. 113 procflags, skipping spectral fitting [Sun Apr 8 19:32:43 2012] Flag c found in src. 113 procflags, skipping spectral fitting