[Sat Apr  7 10:10:05 2012] Detection parameters:
  Position = (257.6, 201.8) = 5 34 40.39 21 55 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.2 +/- 34.6
  Background counts = 331.0
  Rate = 0.02 +/- 0.003

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 7.61'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.4, npix_max = 32, mask sum = 23, frac = 0.707
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 10.23"
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99.csv
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99_1.ximg exists
[Sat Apr  7 23:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99.csv
[Sat Apr  7 23:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Sat Apr  7 23:30:52 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Sat Apr  7 23:30:52 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Sat Apr  7 23:31:21 2012] Spatial fit model total counts = 3485.390000, observed total counts = 3214.000000
[Sat Apr  7 23:31:21 2012] Offset between fit and detection position for source 102 = 1.711174 pixels
[Sat Apr  7 23:31:21 2012] 3144.786000 total counts/ 2851.960000 bgd. counts: snr = 5.483248
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.711174 pixels
  Position = (259.2, 202.2) = 5 34 39.87 21 55 17.0
  Extent = 9.3 (5.2-13.1)", rotation angle = 0
  Source counts = 292.8 +/- 56.1
  Background counts = 2852.0
  Rate = 0.02 +/- 0.004
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 08:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Sun Apr  8 08:13:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.724
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 9.26"
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93.csv
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93_1.ximg exists
[Sun Apr  8 14:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93.csv
[Sun Apr  8 14:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93.csv
[Sun Apr  8 14:21:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sun Apr  8 14:21:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93.csv
[Sun Apr  8 14:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 3300.240000, observed total counts = 2941.000000
[Sun Apr  8 14:22:17 2012] Poor agreement between spatial fit and data for source 102
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 14:22:17 2012] Source is confused with source 100
[Sun Apr  8 16:44:33 2012] XMMSAS src. selection expression = ellipse(22502.492600, 17545.278460, 555.320416, 555.320416, 0.000000, X, Y)
[Sun Apr  8 16:44:33 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102_src.reg
[Sun Apr  8 16:44:33 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (227, 170) - (291, 234)
[Sun Apr  8 16:44:33 2012] XMMSAS bgd. selection expression = annulus(22502.492600, 17545.278460, 925.534027, 1851.068053, X, Y) && !ellipse(24561.521454, 17478.762192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24768.158000, 16881.758000, 924.808027, 924.808027, 0.000000, X, Y) && !ellipse(24131.810272, 16909.919510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.912445, 17370.981277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21593.918600, 17760.400400, 1652.048048, 1652.048048, 0.000000, X, Y) && !ellipse(20501.693588, 17615.396637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.528400, 15305.959800, 1023.656029, 1023.656029, 0.000000, X, Y) && !ellipse(23818.926000, 15985.748000, 651.989619, 651.989619, 0.000000, X, Y) && !ellipse(23988.937836, 14967.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.328000, 17409.366800, 1754.264050, 1754.264050, 0.000000, X, Y) && !ellipse(25646.892120, 16444.711914, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21026.371185, 17616.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.894882, 16918.148773, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:33 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102.gif
[Sun Apr  8 17:09:27 2012] Mean detx,y = (-1728.27, 7008.60) 
[Sun Apr  8 17:09:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 17:09:33 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 17:09:33 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Apr  8 17:09:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sun Apr  8 19:28:17 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:17 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Apr  8 19:28:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:19 2012] Using photon index=1.80, rate=0.0219, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src102.arf
[Sun Apr  8 19:28:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:19 2012] Updating source flux to 4.5e-13
[Sun Apr  8 19:32:43 2012] Flag p found in src. 102 procflags, skipping spectral fitting
[Sun Apr  8 19:32:43 2012] Flag c found in src. 102 procflags, skipping spectral fitting