[Sat Apr  7 10:10:03 2012] Detection parameters:
  Position = (281.5, 174.1) = 5 34 32.90 21 53 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 797.8 +/- 40.4
  Background counts = 299.1
  Rate = 0.1 +/- 0.006

[Sat Apr  7 10:10:05 2012] Off-axis axis estimate = 9.10'
[Sat Apr  7 17:12:44 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 17:12:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr  7 17:12:44 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Apr  7 17:12:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.820
[Sat Apr  7 17:12:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.98"
[Sat Apr  7 23:30:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3.ximg exists
[Sat Apr  7 23:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3.csv
[Sat Apr  7 23:30:49 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Apr  7 23:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3.csv
[Sat Apr  7 23:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Apr  7 23:30:51 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Apr  7 23:30:51 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Apr  7 23:31:20 2012] Spatial fit model total counts = 5543.040000, observed total counts = 5656.000000
[Sat Apr  7 23:31:20 2012] Offset between fit and detection position for source 10 = 0.559431 pixels
[Sat Apr  7 23:31:20 2012] 4997.179000 total counts/ 4700.040000 bgd. counts: snr = 4.334199
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.559431 pixels
  Position = (281.9, 174.5) = 5 34 32.79 21 53 16.5
  Extent = 7.2 (5.8-9.2)", rotation angle = 0
  Source counts = 297.1 +/- 70.7
  Background counts = 4700.0
  Rate = 0.02 +/- 0.005
[Sat Apr  7 23:31:21 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:21 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 23:31:21 2012] Source does appear to be extended
[Sat Apr  7 23:31:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:21 2012] Source is confused with source 108
[Sat Apr  7 23:31:21 2012] Source is confused with source 109
[Sat Apr  7 23:31:21 2012] Source is confused with source 107
[Sat Apr  7 23:31:21 2012] Source is confused with source 9
[Sat Apr  7 23:31:21 2012] Source is confused with source 110
[Sun Apr  8 08:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  8 08:13:58 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Sun Apr  8 08:13:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.087
[Sun Apr  8 08:13:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.16"
[Sun Apr  8 14:21:48 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src3.ximg exists
[Sun Apr  8 14:21:48 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Apr  8 14:21:48 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Apr  8 14:21:50 2012] fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Apr  8 14:21:50 2012] Fit fullrun_mos2_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Apr  8 14:22:17 2012] Spatial fit model total counts = 5569.100000, observed total counts = 5656.000000
[Sun Apr  8 14:22:17 2012] Offset between fit and detection position for source 10 = 0.026674 pixels
[Sun Apr  8 14:22:17 2012] 5312.507000 total counts/ 5073.550000 bgd. counts: snr = 3.354778
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.026674 pixels
  Position = (281.9, 174.5) = 5 34 32.78 21 53 16.5
  Extent = 6.9 (5.6-8.4)", rotation angle = 0
  Source counts = 239.0 +/- 72.9
  Background counts = 5073.6
  Rate = 0.02 +/- 0.005
[Sun Apr  8 14:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:17 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:17 2012] Source does appear to be extended
[Sun Apr  8 14:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 16:44:30 2012] XMMSAS src. selection expression = ellipse(24475.578200, 15134.825200, 411.838212, 411.838212, 0.000000, X, Y)
[Sun Apr  8 16:44:30 2012] Writing source region out to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_src.reg
[Sun Apr  8 16:44:30 2012] Extracting stamp from image fullrun_mos2_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (258, 151) - (306, 198)
[Sun Apr  8 16:44:30 2012] XMMSAS bgd. selection expression = annulus(24475.578200, 15134.825200, 686.397020, 1372.794040, X, Y) && !ellipse(24541.420000, 14398.928000, 659.440019, 659.440019, 0.000000, X, Y) && !ellipse(24768.158000, 16881.758000, 924.808027, 924.808027, 0.000000, X, Y) && !ellipse(24131.810272, 16909.919510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.912445, 17370.981277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24477.473846, 13436.137589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21593.918600, 17760.400400, 1652.048048, 1652.048048, 0.000000, X, Y) && !ellipse(25035.528400, 15305.959800, 1023.656029, 1023.656029, 0.000000, X, Y) && !ellipse(24386.209869, 13853.052856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.926000, 15985.748000, 651.989619, 651.989619, 0.000000, X, Y) && !ellipse(24000.540314, 12913.836243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23988.937836, 14967.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23594.518000, 14260.056000, 1346.568039, 1346.568039, 0.000000, X, Y) && !ellipse(24461.068420, 14708.573654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25646.892120, 16444.711914, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Apr  8 16:44:30 2012] Writing fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10.gif
[Sun Apr  8 16:46:23 2012] Mean detx,y = (391.75, 9204.69) 
[Sun Apr  8 16:46:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 16:46:29 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 16:46:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Apr  8 16:46:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Apr  8 19:28:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:16 2012] Error reading totcts from fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Apr  8 19:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:17 2012] Using photon index=1.80, rate=0.0179, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10.arf
[Sun Apr  8 19:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:17 2012] Updating source flux to 6.6e-13
[Sun Apr  8 19:32:43 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Sun Apr  8 19:37:43 2012] Reading fit data from xmm0412591001/analysis//spectral/fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_pl.csv
[Sun Apr  8 19:37:43 2012] Spectral fit parameter nH value = 1.47872e+21
[Sun Apr  8 19:37:43 2012] Spectral fit parameter PhoIndex value = 1.52417
[Sun Apr  8 19:37:43 2012] Failed to get F(0.3-8.0) from xmm0412591001/analysis//spectral/fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Sun Apr  8 19:37:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:37:43 2012] Using Nh = 1.5e+21, photon index=1.52, rate=0.0179, arf fullrun_mos2_xmm0412591001_pi300-10000_pass1_cl_src10.arf
[Sun Apr  8 19:37:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:37:43 2012] Updating source flux to 8e-13