[Sat Apr 7 10:09:06 2012] Detection parameters: Position = (284.2, 183.9) = 5 34 32.06 21 53 56.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 340.4 +/- 36.9 Background counts = 425.0 Rate = 0.04 +/- 0.004 [Sat Apr 7 10:09:07 2012] Off-axis axis estimate = 8.37' [Sat Apr 7 10:13:07 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting [Sat Apr 7 10:13:07 2012] Initial guess for spatial extent in simple fitting = 10.61" [Sat Apr 7 10:13:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.042 [Sat Apr 7 10:13:07 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 10.61" [Sat Apr 7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75.ximg exists [Sat Apr 7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75.csv [Sat Apr 7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75_1.ximg exists [Sat Apr 7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75.csv [Sat Apr 7 17:12:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Apr 7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src75.ximg exists [Sat Apr 7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists [Sat Apr 7 17:12:43 2012] Fit fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly [Sat Apr 7 23:31:07 2012] Spatial fit model total counts = 6711.450000, observed total counts = 6697.000000 [Sat Apr 7 23:31:07 2012] Offset between fit and detection position for source 88 = 5.514331 pixels [Sat Apr 7 23:31:07 2012] 6722.783000 total counts/ 5830.960000 bgd. counts: snr = 11.679080 Spatial fit parameters: Offset between fit and detection position for source 88 = 5.514331 pixels Position = (284.5, 178.4) = 5 34 31.96 21 53 33.5 Extent = 21.1 (21.0-21.2)", rotation angle = 0 Source counts = 891.8 +/- 82.0 Background counts = 5831.0 Rate = 0.07 +/- 0.006 [Sat Apr 7 23:31:07 2012] Vigneting correction estimate = 1.000000 [Sat Apr 7 23:31:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Apr 7 23:31:07 2012] Assessing source extent using major axis lower bound [Sat Apr 7 23:31:07 2012] Source does appear to be extended [Sat Apr 7 23:31:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Apr 7 23:31:07 2012] Source is confused with source 91 [Sat Apr 7 23:31:07 2012] Source is confused with source 92 [Sat Apr 7 23:31:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Apr 7 23:31:37 2012] Initial guess for spatial extent in simple fitting = 21.15" [Sat Apr 7 23:31:37 2012] source mask rpix=4.9, npix_max = 114, mask sum = 121, frac = 1.053 [Sat Apr 7 23:31:37 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 21.15" [Sun Apr 8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67.ximg exists [Sun Apr 8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67.csv [Sun Apr 8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67_1.ximg exists [Sun Apr 8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67.csv [Sun Apr 8 08:13:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Apr 8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src67.ximg exists [Sun Apr 8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists [Sun Apr 8 08:13:58 2012] Fit fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly [Sun Apr 8 14:22:04 2012] Warning, spatial fit 67 centroid is now closest to src. 91 [Sun Apr 8 14:22:04 2012] Source 88 is offset by 7.876759 and 1.058943 pixels which is larger than 2 X fitted extent = 1.296621 x 1.296621, not incorporating fit results [Sun Apr 8 14:22:04 2012] Vigneting correction estimate = 1.000000 [Sun Apr 8 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Apr 8 14:22:04 2012] Assessing source extent using major axis lower bound [Sun Apr 8 14:22:04 2012] Source does appear to be extended [Sun Apr 8 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Apr 8 14:22:35 2012] XMMSAS src. selection expression = ellipse(24705.628000, 15474.992000, 1268.736037, 1268.736037, 0.000000, X, Y) [Sun Apr 8 14:22:35 2012] Writing source region out to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88_src.reg [Sun Apr 8 14:22:35 2012] Extracting stamp from image fullrun_mos1_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (212, 106) - (357, 251) [Sun Apr 8 14:22:35 2012] XMMSAS bgd. selection expression = annulus(24705.628000, 15474.992000, 2114.560061, 4229.120122, X, Y) && !ellipse(22660.342590, 17663.045120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.107056, 17577.076599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.158400, 17065.787800, 823.624024, 823.624024, 0.000000, X, Y) && !ellipse(20603.751587, 16747.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.805000, 11201.386080, 874.312025, 874.312025, 0.000000, X, Y) && !ellipse(24211.043200, 10466.286000, 2559.104074, 2559.104074, 0.000000, X, Y) && !ellipse(24494.761800, 9507.292000, 2165.200062, 2165.200062, 0.000000, X, Y) && !ellipse(21256.978000, 17789.144000, 853.240025, 853.240025, 0.000000, X, Y) && !ellipse(23224.002655, 17585.352325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.631012, 17569.007965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.730774, 17526.708038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19780.804000, 17559.422000, 1708.048049, 1708.048049, 0.000000, X, Y) && !ellipse(20902.182190, 17343.647751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20288.854492, 17358.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21560.827520, 17264.456000, 1613.872046, 1613.872046, 0.000000, X, Y) && !ellipse(22463.631470, 17023.870712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19720.550000, 17090.474000, 1734.960050, 1734.960050, 0.000000, X, Y) && !ellipse(24782.766000, 16383.433000, 1657.672048, 1657.672048, 0.000000, X, Y) && !ellipse(21626.157880, 16372.598000, 1697.272049, 1697.272049, 0.000000, X, Y) && !ellipse(19978.237800, 15916.110000, 1644.648047, 1644.648047, 0.000000, X, Y) && !ellipse(24480.868800, 14781.198000, 2644.472076, 2644.472076, 0.000000, X, Y) && !ellipse(24313.005402, 14381.458115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.985000, 13978.428000, 3734.448107, 3734.448107, 0.000000, X, Y) && !ellipse(24401.614349, 13426.741440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24199.031600, 13090.266000, 1867.224054, 1867.224054, 0.000000, X, Y) && !ellipse(24139.220000, 12849.464000, 1867.248054, 1867.248054, 0.000000, X, Y) && !ellipse(23705.975433, 10798.615555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.795200, 11023.368000, 2066.616059, 2066.616059, 0.000000, X, Y) && !ellipse(23741.745800, 10089.152600, 1448.152042, 1448.152042, 0.000000, X, Y) && !ellipse(24361.202000, 9242.242000, 2188.400063, 2188.400063, 0.000000, X, Y) [Sun Apr 8 14:22:35 2012] Writing fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88.gif [Sun Apr 8 14:55:28 2012] Mean detx,y = (8999.50, -603.26) [Sun Apr 8 14:55:28 2012] Setting backscal keywords in source and bgd. spectrum [Sun Apr 8 14:55:35 2012] Binned source spectrum to 10 counts/bin [Sun Apr 8 14:55:35 2012] Setting source spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Sun Apr 8 14:55:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88_bgd.pi.gz [Sun Apr 8 19:28:13 2012] Updating aperture counts using extracted products [Sun Apr 8 19:28:13 2012] Error reading totcts from fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Sun Apr 8 19:28:15 2012] Calculating source flux in energy range 0.30-8.00 [Sun Apr 8 19:28:15 2012] Using photon index=1.80, rate=0.0668, arf fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src88.arf [Sun Apr 8 19:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Apr 8 19:28:15 2012] Updating source flux to 1.1e-12 [Sun Apr 8 19:28:21 2012] Flag b found in src. 88 procflags, skipping spectral fitting [Sun Apr 8 19:28:21 2012] Flag c found in src. 88 procflags, skipping spectral fitting