[Sat Apr  7 10:09:06 2012] Detection parameters:
  Position = (250.5, 201.1) = 5 34 42.59 21 55 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.5 +/- 34.6
  Background counts = 423.1
  Rate = 0.03 +/- 0.004

[Sat Apr  7 10:09:07 2012] Off-axis axis estimate = 7.87'
[Sat Apr  7 10:13:07 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:13:07 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Sat Apr  7 10:13:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Sat Apr  7 10:13:07 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.36"
[Sat Apr  7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63.ximg exists
[Sat Apr  7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63.csv
[Sat Apr  7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Apr  7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63.csv
[Sat Apr  7 17:12:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Apr  7 17:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Apr  7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Apr  7 17:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Apr  7 17:12:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:07 2012] Warning, spatial fit 63 centroid is now closest to src. 8
[Sat Apr  7 23:31:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:07 2012] Assessing source extent using major
[Sat Apr  7 23:31:07 2012] Source does appear to be extended
[Sat Apr  7 23:31:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:07 2012] Source is confused with source 67
[Sat Apr  7 23:31:37 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 23:31:37 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Sat Apr  7 23:31:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Sat Apr  7 23:31:37 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 10.36"
[Sun Apr  8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58.ximg exists
[Sun Apr  8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58.csv
[Sun Apr  8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Apr  8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58.csv
[Sun Apr  8 08:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Apr  8 08:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Apr  8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Apr  8 08:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Apr  8 08:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:04 2012] Source 76 is offset by 3.290147 and -4.399782 pixels which is larger than
2 X fitted extent = 2.817669 x 2.817669, not incorporating fit results
[Sun Apr  8 14:22:04 2012] Spatial fit model total counts = 6044.400000, observed total counts = 5485.000000
[Sun Apr  8 14:22:04 2012] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:04 2012] Spatial fit model total counts = 14369.200000, observed total counts = 14490.000000
[Sun Apr  8 14:22:04 2012] Offset between fit and detection position for source 76 = 2.994765 pixels
[Sun Apr  8 14:22:04 2012] Warning, changing simple spatial fit ID from 58 to 64
[Sun Apr  8 14:22:04 2012] 14550.447000 total counts/ 13928.800000 bgd. counts: snr = 5.267287
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.994765 pixels
  Position = (248.4, 199.0) = 5 34 43.26 21 55 2.9
  Extent = 20.2 (15.7-27.8)", rotation angle = 0
  Source counts = 621.6 +/- 120.6
  Background counts = 13928.8
  Rate = 0.05 +/- 0.009
[Sun Apr  8 14:22:04 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:04 2012] Assessing source extent using major axis lower bound
[Sun Apr  8 14:22:04 2012] Source does appear to be extended
[Sun Apr  8 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 14:22:35 2012] XMMSAS src. selection expression = ellipse(21560.827520, 17264.456000, 1210.404035, 1210.404035, 0.000000, X, Y)
[Sun Apr  8 14:22:35 2012] Writing source region out to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76_src.reg
[Sun Apr  8 14:22:35 2012] Extracting stamp from image fullrun_mos1_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (179, 129) - (318, 269)
[Sun Apr  8 14:22:35 2012] XMMSAS bgd. selection expression = annulus(21560.827520, 17264.456000, 2017.340058, 4034.680116, X, Y) && !ellipse(18252.691284, 17285.401718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22660.342590, 17663.045120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.107056, 17577.076599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.158400, 17065.787800, 823.624024, 823.624024, 0.000000, X, Y) && !ellipse(20603.751587, 16747.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16965.308000, 21653.266000, 956.776028, 956.776028, 0.000000, X, Y) && !ellipse(17733.626419, 21537.003677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17174.562210, 21177.405182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17682.045837, 20756.101151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17658.992218, 20229.416351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17311.901566, 19276.437393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21256.978000, 17789.144000, 853.240025, 853.240025, 0.000000, X, Y) && !ellipse(19340.864334, 17615.261230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.002655, 17585.352325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.631012, 17569.007965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18623.123627, 17605.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19780.804000, 17559.422000, 1708.048049, 1708.048049, 0.000000, X, Y) && !ellipse(20902.182190, 17343.647751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20288.854492, 17358.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19168.467972, 16841.942795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.354000, 16836.116000, 1310.040038, 1310.040038, 0.000000, X, Y) && !ellipse(22463.631470, 17023.870712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19720.550000, 17090.474000, 1734.960050, 1734.960050, 0.000000, X, Y) && !ellipse(24782.766000, 16383.433000, 1657.672048, 1657.672048, 0.000000, X, Y) && !ellipse(21626.157880, 16372.598000, 1697.272049, 1697.272049, 0.000000, X, Y) && !ellipse(18626.613663, 16392.891052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19978.237800, 15916.110000, 1644.648047, 1644.648047, 0.000000, X, Y) && !ellipse(24705.628000, 15474.992000, 1691.648049, 1691.648049, 0.000000, X, Y) && !ellipse(18241.714066, 15076.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.868800, 14781.198000, 2644.472076, 2644.472076, 0.000000, X, Y) && !ellipse(24313.005402, 14381.458115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.985000, 13978.428000, 3734.448107, 3734.448107, 0.000000, X, Y) && !ellipse(24401.614349, 13426.741440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24199.031600, 13090.266000, 1867.224054, 1867.224054, 0.000000, X, Y) && !ellipse(24139.220000, 12849.464000, 1867.248054, 1867.248054, 0.000000, X, Y)
[Sun Apr  8 14:22:35 2012] Writing fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76.gif
[Sun Apr  8 14:47:20 2012] Mean detx,y = (7508.46, 2487.68) 
[Sun Apr  8 14:47:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 14:47:32 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 14:47:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Apr  8 14:47:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Sun Apr  8 19:28:13 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:13 2012] Error reading totcts from fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Apr  8 19:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:15 2012] Using photon index=1.80, rate=0.0466, arf fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src76.arf
[Sun Apr  8 19:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:15 2012] Updating source flux to 6.8e-13
[Sun Apr  8 19:28:21 2012] Flag b found in src. 76 procflags, skipping spectral fitting
[Sun Apr  8 19:28:21 2012] Flag p found in src. 76 procflags, skipping spectral fitting
[Sun Apr  8 19:28:21 2012] Flag c found in src. 76 procflags, skipping spectral fitting