[Sat Apr  7 10:09:06 2012] Detection parameters:
  Position = (222.9, 203.0) = 5 34 51.23 21 55 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 30.5
  Background counts = 338.6
  Rate = 0.02 +/- 0.003

[Sat Apr  7 10:09:07 2012] Off-axis axis estimate = 8.82'
[Sat Apr  7 10:13:07 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:13:07 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Apr  7 10:13:07 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Sat Apr  7 10:13:07 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.84"
[Sat Apr  7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55.ximg exists
[Sat Apr  7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55.csv
[Sat Apr  7 17:12:40 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Apr  7 17:12:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55.csv
[Sat Apr  7 17:12:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Apr  7 17:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Apr  7 17:12:43 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Apr  7 17:12:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Apr  7 17:12:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:07 2012] Warning, spatial fit 55 centroid is now closest to src. 11
[Sat Apr  7 23:31:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:07 2012] Assessing source extent using major
[Sat Apr  7 23:31:07 2012] Source does appear to be extended
[Sat Apr  7 23:31:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:07 2012] Source is confused with source 73
[Sat Apr  7 23:31:07 2012] Source is confused with source 79
[Sat Apr  7 23:31:07 2012] Source is confused with source 81
[Sat Apr  7 23:31:37 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 23:31:37 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Apr  7 23:31:37 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Sat Apr  7 23:31:37 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 10.84"
[Sun Apr  8 08:13:56 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50.ximg exists
[Sun Apr  8 08:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50.csv
[Sun Apr  8 08:13:56 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50_1.ximg exists
[Sun Apr  8 08:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50.csv
[Sun Apr  8 08:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sun Apr  8 08:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sun Apr  8 08:13:58 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sun Apr  8 08:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sun Apr  8 08:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:04 2012] Source 68 is offset by 2.533038 and -2.286400 pixels which is larger than
2 X fitted extent = 1.291651 x 1.291651, not incorporating fit results
[Sun Apr  8 14:22:04 2012] Warning, spatial fit 50 centroid is now closest to src. 75
[Sun Apr  8 14:22:04 2012] Spatial fit model total counts = 25915.000000, observed total counts = 19844.000000
[Sun Apr  8 14:22:04 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr  8 14:22:04 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:04 2012] Assessing source extent using major
[Sun Apr  8 14:22:04 2012] Source does appear to be extended
[Sun Apr  8 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 14:22:34 2012] XMMSAS src. selection expression = ellipse(19340.864334, 17615.261230, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  8 14:22:34 2012] Writing source region out to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68_src.reg
[Sun Apr  8 14:22:34 2012] Extracting stamp from image fullrun_mos1_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (185, 166) - (260, 241)
[Sun Apr  8 14:22:34 2012] XMMSAS bgd. selection expression = annulus(19340.864334, 17615.261230, 1087.500000, 2175.000000, X, Y) && !ellipse(18252.691284, 17285.401718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.751587, 16747.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17658.992218, 20229.416351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17311.901566, 19276.437393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21256.978000, 17789.144000, 853.240025, 853.240025, 0.000000, X, Y) && !ellipse(18623.123627, 17605.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19780.804000, 17559.422000, 1708.048049, 1708.048049, 0.000000, X, Y) && !ellipse(20902.182190, 17343.647751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20288.854492, 17358.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21560.827520, 17264.456000, 1613.872046, 1613.872046, 0.000000, X, Y) && !ellipse(19168.467972, 16841.942795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.354000, 16836.116000, 1310.040038, 1310.040038, 0.000000, X, Y) && !ellipse(19720.550000, 17090.474000, 1734.960050, 1734.960050, 0.000000, X, Y) && !ellipse(21626.157880, 16372.598000, 1697.272049, 1697.272049, 0.000000, X, Y) && !ellipse(18626.613663, 16392.891052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19978.237800, 15916.110000, 1644.648047, 1644.648047, 0.000000, X, Y) && !ellipse(18241.714066, 15076.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.985000, 13978.428000, 3734.448107, 3734.448107, 0.000000, X, Y)
[Sun Apr  8 14:22:34 2012] Writing fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68.gif
[Sun Apr  8 14:42:29 2012] Mean detx,y = (7226.78, 4756.66) 
[Sun Apr  8 14:42:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 14:42:36 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 14:42:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Apr  8 14:42:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Apr  8 15:53:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 15:53:23 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:13 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:13 2012] Error reading totcts from fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Apr  8 19:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:15 2012] Using photon index=1.80, rate=0.0203, arf fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src68.arf
[Sun Apr  8 19:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:15 2012] Updating source flux to 3.4e-13
[Sun Apr  8 19:28:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting