[Sat Apr  7 10:09:05 2012] Detection parameters:
  Position = (201.9, 298.1) = 5 34 57.82 22 2 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.9 +/- 35.0
  Background counts = 459.5
  Rate = 0.03 +/- 0.003

[Sat Apr  7 10:09:07 2012] Off-axis axis estimate = 7.00'
[Sat Apr  7 10:13:07 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:13:07 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Sat Apr  7 10:13:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Sat Apr  7 10:13:07 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.93"
[Sat Apr  7 17:12:39 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26.ximg exists
[Sat Apr  7 17:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26.csv
[Sat Apr  7 17:12:39 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Apr  7 17:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26.csv
[Sat Apr  7 17:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 17:12:42 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Apr  7 17:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Apr  7 17:12:42 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Apr  7 17:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Apr  7 17:12:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 23:31:07 2012] Warning, spatial fit 26 centroid is now closest to src. 3
[Sat Apr  7 23:31:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 23:31:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 23:31:07 2012] Assessing source extent using major
[Sat Apr  7 23:31:07 2012] Source does appear to be extended
[Sat Apr  7 23:31:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:31:07 2012] Source is confused with source 28
[Sat Apr  7 23:31:07 2012] Source is confused with source 32
[Sat Apr  7 23:31:07 2012] Source is confused with source 36
[Sat Apr  7 23:31:37 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 23:31:37 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Sat Apr  7 23:31:37 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Sat Apr  7 23:31:37 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.93"
[Sun Apr  8 08:13:56 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22.ximg exists
[Sun Apr  8 08:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22.csv
[Sun Apr  8 08:13:56 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Apr  8 08:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22.csv
[Sun Apr  8 08:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Apr  8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Apr  8 08:13:57 2012] fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Apr  8 08:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Apr  8 08:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591001_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  8 14:22:04 2012] Source 33 is offset by -6.171245 and -1.933696 pixels which is larger than
2 X fitted extent = 1.256423 x 1.256423, not incorporating fit results
[Sun Apr  8 14:22:04 2012] Warning, spatial fit 22 centroid is now closest to src. 31
[Sun Apr  8 14:22:04 2012] Vigneting correction estimate = 1.000000
[Sun Apr  8 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  8 14:22:04 2012] Assessing source extent using major
[Sun Apr  8 14:22:04 2012] Source does appear to be extended
[Sun Apr  8 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 14:22:33 2012] XMMSAS src. selection expression = ellipse(17515.073700, 25887.740448, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  8 14:22:33 2012] Writing source region out to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33_src.reg
[Sun Apr  8 14:22:33 2012] Extracting stamp from image fullrun_mos1_xmm0412591001_pi300-10000_cl_sm2.00.img.gz, (164, 261) - (239, 336)
[Sun Apr  8 14:22:34 2012] XMMSAS bgd. selection expression = annulus(17515.073700, 25887.740448, 1087.500000, 2175.000000, X, Y) && !ellipse(16440.883362, 23726.764313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18165.712524, 27702.803436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17195.832000, 25105.824000, 874.472025, 874.472025, 0.000000, X, Y) && !ellipse(17733.327728, 28130.602997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17569.704000, 26802.350000, 1569.480045, 1569.480045, 0.000000, X, Y) && !ellipse(16929.727356, 26481.503235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17329.910000, 26550.504000, 1181.544034, 1181.544034, 0.000000, X, Y) && !ellipse(17829.706619, 25450.409332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16815.464188, 25268.569031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16796.293549, 24304.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17821.138840, 24290.594299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17875.825806, 23612.834351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16699.000000, 23010.838318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17785.414093, 22916.499817, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 14:22:34 2012] Writing fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33.gif
[Sun Apr  8 14:36:54 2012] Mean detx,y = (-943.86, 7049.83) 
[Sun Apr  8 14:36:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 14:36:59 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 14:36:59 2012] Setting source spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Apr  8 14:36:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Apr  8 15:38:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 15:38:26 2012] rmf not generated due to insufficient counts
[Sun Apr  8 19:28:13 2012] Updating aperture counts using extracted products
[Sun Apr  8 19:28:13 2012] Error reading totcts from fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Apr  8 19:28:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 19:28:14 2012] Using photon index=1.80, rate=0.0282, arf fullrun_mos1_xmm0412591001_pi300-10000_pass1_cl_src33.arf
[Sun Apr  8 19:28:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 19:28:14 2012] Updating source flux to 4.2e-13
[Sun Apr  8 19:28:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting