[Fri Feb 17 16:10:38 2012] Detection parameters:
  Position = (282.9, 234.0) = 5 34 41.27 21 54 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.7 +/- 28.5
  Background counts = 318.1
  Rate = 0.03 +/- 0.005

[Fri Feb 17 16:10:38 2012] Off-axis axis estimate = 4.80'
[Fri Feb 17 18:40:59 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:40:59 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Fri Feb 17 18:40:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.172
[Fri Feb 17 18:40:59 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.83"
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39.csv
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39.csv
[Fri Feb 17 22:57:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Feb 17 22:57:17 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Feb 17 22:57:38 2012] Spatial fit model total counts = 2847.060000, observed total counts = 2895.000000
[Fri Feb 17 22:57:38 2012] Offset between fit and detection position for source 53 = 2.331807 pixels
[Fri Feb 17 22:57:38 2012] 2461.638000 total counts/ 781.078000 bgd. counts: snr = 60.132162
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 2.331807 pixels
  Position = (285.0, 234.9) = 5 34 40.59 21 54 55.3
  Extent = 17.7 (17.6-35.3)", rotation angle = 0
  Source counts = 1680.6 +/- 49.6
  Background counts = 781.1
  Rate = 0.2 +/- 0.007
[Fri Feb 17 22:57:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:38 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:38 2012] Source does appear to be extended
[Fri Feb 17 22:57:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:38 2012] Source is confused with source 57
[Sat Feb 18 02:30:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:30:30 2012] Initial guess for spatial extent in simple fitting = 17.66"
[Sat Feb 18 02:30:30 2012] source mask rpix=4.1, npix_max = 83, mask sum = 87, frac = 1.046
[Sat Feb 18 02:30:30 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 17.66"
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src36.ximg exists
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Feb 18 06:36:06 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src36 appears to have run properly
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Feb 18 06:36:08 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sat Feb 18 06:36:27 2012] Warning, spatial fit 36 centroid is now closest to src. 48
[Sat Feb 18 06:36:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:27 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:27 2012] Source does appear to be extended
[Sat Feb 18 06:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 07:42:22 2012] Counts = 1680.560000, rescaling region sizes by 2.000000
[Sat Feb 18 07:42:22 2012] XMMSAS src. selection expression = ellipse(24748.598000, 20388.700340, 2119.368061, 2119.368061, 0.000000, X, Y)
[Sat Feb 18 07:42:22 2012] Writing source region out to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53_src.reg
[Sat Feb 18 07:42:22 2012] Extracting stamp from image fullrun_mos2_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (163, 113) - (407, 357)
[Sat Feb 18 07:42:22 2012] XMMSAS bgd. selection expression = annulus(24748.598000, 20388.700340, 7064.560203, 14129.120407, X, Y) && !ellipse(28165.168000, 34434.037400, 1330.488038, 1330.488038, 0.000000, X, Y) && !ellipse(27078.591380, 34289.104000, 1108.968032, 696.476020, 4.286470, X, Y) && !ellipse(27942.808000, 35012.224000, 855.984025, 855.984025, 0.000000, X, Y) && !ellipse(28603.442474, 34381.853546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31393.324000, 34222.528200, 1708.744049, 1708.744049, 0.000000, X, Y) && !ellipse(27921.640000, 36006.911400, 2940.928085, 2940.928085, 0.000000, X, Y) && !ellipse(27321.608000, 36125.232000, 1771.952051, 361.681610, 90.000000, X, Y) && !ellipse(27011.642000, 35851.394000, 1647.368047, 1647.368047, 0.000000, X, Y) && !ellipse(26443.768000, 19673.558000, 639.780018, 639.780018, 0.000000, X, Y) && !ellipse(26965.342499, 20214.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.517912, 20340.059667, 1631.072047, 870.527130, 0.000000, X, Y) && !ellipse(26177.475830, 34376.947052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.880000, 34293.090400, 1668.472048, 1668.472048, 0.000000, X, Y) && !ellipse(26385.990200, 20356.856600, 1414.248041, 1414.248041, 0.000000, X, Y) && !ellipse(27369.172455, 35082.943237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.317078, 19610.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.454529, 34380.876495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.948761, 20356.594910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.358521, 20142.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29263.073883, 34310.122620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20009.837600, 27087.776000, 1436.966713, 1436.966713, 0.000000, X, Y) && !ellipse(25358.845500, 20464.184000, 1413.944041, 697.795220, 2.130000, X, Y) && !ellipse(23653.674000, 20505.373000, 1425.296041, 1425.296041, 0.000000, X, Y) && !ellipse(19843.604752, 29683.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29043.444550, 34889.288055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.077362, 20224.309402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27191.460000, 19283.914000, 618.655218, 618.655218, 0.000000, X, Y) && !ellipse(26608.896851, 19070.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20519.710617, 28822.846130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20416.064000, 30050.076000, 1504.992043, 1504.992043, 0.000000, X, Y) && !ellipse(20610.766174, 29329.754944, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 07:42:22 2012] Writing fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53.gif
[Sat Feb 18 08:16:19 2012] Mean detx,y = (1951.05, -7796.47) 
[Sat Feb 18 08:16:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 08:19:20 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 08:19:21 2012] Setting source spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Feb 18 08:19:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Feb 18 10:11:00 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:11:00 2012] Error reading totcts from fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Feb 18 10:11:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:11:04 2012] Using photon index=1.80, rate=0.243, arf fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src53.arf
[Sat Feb 18 10:11:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:11:04 2012] Updating source flux to 3.5e-12
[Sat Feb 18 10:16:04 2012] Flag c found in src. 53 procflags, skipping spectral fitting