[Fri Feb 17 16:10:38 2012] Detection parameters:
  Position = (319.1, 234.0) = 5 34 29.95 21 55 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.8 +/- 22.3
  Background counts = 334.5
  Rate = 0.05 +/- 0.005

[Fri Feb 17 16:10:38 2012] Off-axis axis estimate = 4.90'
[Fri Feb 17 18:40:59 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:40:59 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Fri Feb 17 18:40:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.161
[Fri Feb 17 18:40:59 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.88"
[Fri Feb 17 22:57:15 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18.ximg exists
[Fri Feb 17 22:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18.csv
[Fri Feb 17 22:57:15 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Feb 17 22:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18.csv
[Fri Feb 17 22:57:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Feb 17 22:57:17 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Feb 17 22:57:38 2012] Warning, spatial fit 18 centroid is now closest to src. 51
[Fri Feb 17 22:57:38 2012] Spatial fit model total counts = 3053.110000, observed total counts = 3092.000000
[Fri Feb 17 22:57:38 2012] Offset between fit and detection position for source 49 = 1.199638 pixels
[Fri Feb 17 22:57:38 2012] Warning, changing simple spatial fit ID from 18 to 33
[Fri Feb 17 22:57:38 2012] 2526.397000 total counts/ 514.447000 bgd. counts: snr = 88.704748
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.199638 pixels
  Position = (320.2, 233.6) = 5 34 29.60 21 54 49.6
  Extent = 18.0 (17.6-36.0)", rotation angle = 0
  Source counts = 2012.0 +/- 50.3
  Background counts = 514.4
  Rate = 0.3 +/- 0.007
[Fri Feb 17 22:57:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:38 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:38 2012] Source does appear to be extended
[Fri Feb 17 22:57:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:38 2012] Source is confused with source 54
[Sat Feb 18 02:30:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:30:30 2012] Initial guess for spatial extent in simple fitting = 18.01"
[Sat Feb 18 02:30:30 2012] source mask rpix=4.1, npix_max = 86, mask sum = 72, frac = 0.836
[Sat Feb 18 02:30:30 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 18.01"
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16.csv
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16.csv
[Sat Feb 18 06:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Feb 18 06:36:07 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Feb 18 06:36:27 2012] Warning, spatial fit 16 centroid is now closest to src. 48
[Sat Feb 18 06:36:27 2012] Spatial fit model total counts = 3468.220000, observed total counts = 3569.000000
[Sat Feb 18 06:36:27 2012] Offset between fit and detection position for source 49 = 1.478904 pixels
[Sat Feb 18 06:36:27 2012] Warning, changing simple spatial fit ID from 16 to 31
[Sat Feb 18 06:36:27 2012] 2772.630000 total counts/ 1044.920000 bgd. counts: snr = 53.447738
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.478904 pixels
  Position = (321.5, 234.4) = 5 34 29.20 21 54 52.8
  Extent = 20.4" x 10.9", rotation angle = 0
  Source counts = 1727.7 +/- 52.7
  Background counts = 1044.9
  Rate = 0.2 +/- 0.008
[Sat Feb 18 06:36:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:27 2012] Assessing source extent using major
[Sat Feb 18 06:36:27 2012] Source does appear to be extended
[Sat Feb 18 06:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.87
[Sat Feb 18 06:36:27 2012] Source is asymmetric
[Sat Feb 18 07:42:21 2012] Counts = 1727.710000, rescaling region sizes by 2.000000
[Sat Feb 18 07:42:21 2012] XMMSAS src. selection expression = ellipse(27918.517912, 20340.059667, 2446.608070, 1305.790695, 0.000000, X, Y)
[Sat Feb 18 07:42:21 2012] Writing source region out to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49_src.reg
[Sat Feb 18 07:42:21 2012] Extracting stamp from image fullrun_mos2_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (181, 94) - (462, 375)
[Sat Feb 18 07:42:21 2012] XMMSAS bgd. selection expression = annulus(27918.517912, 20340.059667, 8155.360235, 16310.720469, X, Y) && !ellipse(28165.168000, 34434.037400, 1330.488038, 1330.488038, 0.000000, X, Y) && !ellipse(27078.591380, 34289.104000, 1108.968032, 696.476020, 4.286470, X, Y) && !ellipse(27942.808000, 35012.224000, 855.984025, 855.984025, 0.000000, X, Y) && !ellipse(28603.442474, 34381.853546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28113.288000, 36122.168000, 881.952025, 881.952025, 0.000000, X, Y) && !ellipse(31393.324000, 34222.528200, 1708.744049, 1708.744049, 0.000000, X, Y) && !ellipse(27921.640000, 36006.911400, 2940.928085, 2940.928085, 0.000000, X, Y) && !ellipse(27321.608000, 36125.232000, 1771.952051, 361.681610, 90.000000, X, Y) && !ellipse(27011.642000, 35851.394000, 1647.368047, 1647.368047, 0.000000, X, Y) && !ellipse(26443.768000, 19673.558000, 639.780018, 639.780018, 0.000000, X, Y) && !ellipse(27867.550659, 36894.005096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.342499, 20214.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.769540, 37327.324400, 753.076822, 753.076822, 0.000000, X, Y) && !ellipse(27951.958000, 38346.796000, 1878.968054, 313.186409, 97.412000, X, Y) && !ellipse(26177.475830, 34376.947052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.880000, 34293.090400, 1668.472048, 1668.472048, 0.000000, X, Y) && !ellipse(26385.990200, 20356.856600, 1414.248041, 1414.248041, 0.000000, X, Y) && !ellipse(27369.172455, 35082.943237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.317078, 19610.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.454529, 34380.876495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28469.135162, 36934.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.948761, 20356.594910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.358521, 20142.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29263.073883, 34310.122620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.598000, 20388.700340, 1412.912041, 1412.912041, 0.000000, X, Y) && !ellipse(20009.837600, 27087.776000, 1436.966713, 1436.966713, 0.000000, X, Y) && !ellipse(25358.845500, 20464.184000, 1413.944041, 697.795220, 2.130000, X, Y) && !ellipse(28696.599487, 36061.143646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.674000, 20505.373000, 1425.296041, 1425.296041, 0.000000, X, Y) && !ellipse(19843.604752, 29683.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29043.444550, 34889.288055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.077362, 20224.309402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27191.460000, 19283.914000, 618.655218, 618.655218, 0.000000, X, Y) && !ellipse(26608.896851, 19070.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20519.710617, 28822.846130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20416.064000, 30050.076000, 1504.992043, 1504.992043, 0.000000, X, Y) && !ellipse(27564.925110, 36893.025391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20610.766174, 29329.754944, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 07:42:21 2012] Writing fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49.gif
[Sat Feb 18 07:59:49 2012] Mean detx,y = (-965.98, -7466.81) 
[Sat Feb 18 07:59:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 08:03:40 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 08:03:40 2012] Setting source spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Feb 18 08:03:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Feb 18 10:11:00 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:11:00 2012] Error reading totcts from fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Feb 18 10:11:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:11:03 2012] Using photon index=1.80, rate=0.25, arf fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src49.arf
[Sat Feb 18 10:11:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:11:03 2012] Updating source flux to 4e-12
[Sat Feb 18 10:16:04 2012] Flag c found in src. 49 procflags, skipping spectral fitting