[Fri Feb 17 16:10:38 2012] Detection parameters:
  Position = (315.3, 418.9) = 5 34 31.11 22 8 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.5 +/- 27.7
  Background counts = 233.1
  Rate = 0.05 +/- 0.007

[Fri Feb 17 16:10:38 2012] Off-axis axis estimate = 8.82'
[Fri Feb 17 18:40:59 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:40:59 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Fri Feb 17 18:40:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.866
[Fri Feb 17 18:40:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.84"
[Fri Feb 17 22:57:15 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9.ximg exists
[Fri Feb 17 22:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 22:57:15 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Feb 17 22:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 22:57:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Feb 17 22:57:17 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Feb 17 22:57:38 2012] Warning, spatial fit 9 centroid is now closest to src. 25
[Fri Feb 17 22:57:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:38 2012] Assessing source extent using major
[Fri Feb 17 22:57:38 2012] Source does appear to be extended
[Fri Feb 17 22:57:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:38 2012] Source is confused with source 26
[Sat Feb 18 02:30:30 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:30:30 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Feb 18 02:30:30 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.866
[Sat Feb 18 02:30:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.84"
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9.csv
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9.csv
[Sat Feb 18 06:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 18 06:36:07 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 18 06:36:27 2012] Warning, spatial fit 9 centroid is now closest to src. 27
[Sat Feb 18 06:36:27 2012] Spatial fit model total counts = 5081.370000, observed total counts = 5081.000000
[Sat Feb 18 06:36:27 2012] Offset between fit and detection position for source 37 = 7.613219 pixels
[Sat Feb 18 06:36:27 2012] Warning, changing simple spatial fit ID from 9 to 22
[Sat Feb 18 06:36:27 2012] 4384.575000 total counts/ 3502.560000 bgd. counts: snr = 14.903325
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 7.613219 pixels
  Position = (311.0, 412.6) = 5 34 32.46 22 7 48.4
  Extent = 20.6 (20.6-41.2)", rotation angle = 0
  Source counts = 882.0 +/- 66.2
  Background counts = 3502.6
  Rate = 0.1 +/- 0.01
[Sat Feb 18 06:36:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:27 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:27 2012] Source does appear to be extended
[Sat Feb 18 06:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 07:42:21 2012] XMMSAS src. selection expression = ellipse(27011.642000, 35851.394000, 1235.526036, 1235.526036, 0.000000, X, Y)
[Sat Feb 18 07:42:21 2012] Writing source region out to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37_src.reg
[Sat Feb 18 07:42:21 2012] Extracting stamp from image fullrun_mos2_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (240, 342) - (382, 484)
[Sat Feb 18 07:42:21 2012] XMMSAS bgd. selection expression = annulus(27011.642000, 35851.394000, 2059.210059, 4118.420119, X, Y) && !ellipse(28165.168000, 34434.037400, 1330.488038, 1330.488038, 0.000000, X, Y) && !ellipse(27078.591380, 34289.104000, 1108.968032, 696.476020, 4.286470, X, Y) && !ellipse(27942.808000, 35012.224000, 855.984025, 855.984025, 0.000000, X, Y) && !ellipse(28603.442474, 34381.853546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28113.288000, 36122.168000, 881.952025, 881.952025, 0.000000, X, Y) && !ellipse(31393.324000, 34222.528200, 1708.744049, 1708.744049, 0.000000, X, Y) && !ellipse(27921.640000, 36006.911400, 2940.928085, 2940.928085, 0.000000, X, Y) && !ellipse(27321.608000, 36125.232000, 1771.952051, 361.681610, 90.000000, X, Y) && !ellipse(28200.661255, 40639.869110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27867.550659, 36894.005096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.769540, 37327.324400, 753.076822, 753.076822, 0.000000, X, Y) && !ellipse(27951.958000, 38346.796000, 1878.968054, 313.186409, 97.412000, X, Y) && !ellipse(27660.102600, 37994.461639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.475830, 34376.947052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.880000, 34293.090400, 1668.472048, 1668.472048, 0.000000, X, Y) && !ellipse(27369.172455, 35082.943237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.567280, 38256.546000, 1173.832034, 1173.832034, 0.000000, X, Y) && !ellipse(27567.874291, 41996.703029, 2036.872059, 587.692201, 89.815390, X, Y) && !ellipse(27157.730000, 37487.004000, 774.596022, 774.596022, 0.000000, X, Y) && !ellipse(25074.454529, 34380.876495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28469.135162, 36934.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.177200, 38232.080000, 1308.048038, 735.934421, 90.000000, X, Y) && !ellipse(29263.073883, 34310.122620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.968811, 40407.554047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.823425, 39442.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28696.599487, 36061.143646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29043.444550, 34889.288055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27624.907532, 38922.073120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27564.925110, 36893.025391, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 07:42:21 2012] Writing fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37.gif
[Sat Feb 18 07:57:47 2012] Mean detx,y = (505.25, 8335.49) 
[Sat Feb 18 07:57:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 07:57:59 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 07:57:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Feb 18 07:57:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Feb 18 10:10:59 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:59 2012] Error reading totcts from fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Feb 18 10:11:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:11:03 2012] Using photon index=1.80, rate=0.128, arf fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src37.arf
[Sat Feb 18 10:11:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:11:03 2012] Updating source flux to 2.4e-12
[Sat Feb 18 10:16:04 2012] Flag c found in src. 37 procflags, skipping spectral fitting