[Fri Feb 17 16:10:37 2012] Detection parameters:
  Position = (318.0, 465.0) = 5 34 30.28 22 11 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.4 +/- 26.3
  Background counts = 115.9
  Rate = 0.03 +/- 0.003

[Fri Feb 17 16:10:38 2012] Off-axis axis estimate = 12.16'
[Fri Feb 17 18:40:59 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:40:59 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Feb 17 18:40:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.790
[Fri Feb 17 18:40:59 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 12.51"
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38.csv
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38.csv
[Fri Feb 17 22:57:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Feb 17 22:57:17 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Feb 17 22:57:17 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Feb 17 22:57:38 2012] Warning, spatial fit 38 centroid is now closest to src. 5
[Fri Feb 17 22:57:38 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.909952 pixels away
[Fri Feb 17 22:57:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:38 2012] Assessing source extent using major
[Fri Feb 17 22:57:38 2012] Source does appear to be extended
[Fri Feb 17 22:57:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:38 2012] Source is confused with source 4
[Sat Feb 18 02:30:30 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:30:30 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Sat Feb 18 02:30:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.790
[Sat Feb 18 02:30:30 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.51"
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35.csv
[Sat Feb 18 06:36:06 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Feb 18 06:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35.csv
[Sat Feb 18 06:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Feb 18 06:36:08 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Feb 18 06:36:27 2012] Warning, spatial fit 35 centroid is now closest to src. 16
[Sat Feb 18 06:36:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:27 2012] Assessing source extent using major
[Sat Feb 18 06:36:27 2012] Source does appear to be extended
[Sat Feb 18 06:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 07:42:22 2012] XMMSAS src. selection expression = ellipse(27613.968811, 40407.554047, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 18 07:42:22 2012] Writing source region out to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18_src.reg
[Sat Feb 18 07:42:22 2012] Extracting stamp from image fullrun_mos2_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (280, 428) - (355, 503)
[Sat Feb 18 07:42:22 2012] XMMSAS bgd. selection expression = annulus(27613.968811, 40407.554047, 1087.500000, 2175.000000, X, Y) && !ellipse(27921.640000, 36006.911400, 2940.928085, 2940.928085, 0.000000, X, Y) && !ellipse(28200.661255, 40639.869110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.549316, 41446.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.958000, 38346.796000, 1878.968054, 313.186409, 97.412000, X, Y) && !ellipse(27660.102600, 37994.461639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.567280, 38256.546000, 1173.832034, 1173.832034, 0.000000, X, Y) && !ellipse(27567.874291, 41996.703029, 2036.872059, 587.692201, 89.815390, X, Y) && !ellipse(27157.730000, 37487.004000, 774.596022, 774.596022, 0.000000, X, Y) && !ellipse(28228.597473, 42321.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.177200, 38232.080000, 1308.048038, 735.934421, 90.000000, X, Y) && !ellipse(28234.810242, 43432.439545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.823425, 39442.450897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.258453, 41448.604309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27624.907532, 38922.073120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.090149, 43358.335022, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 07:42:22 2012] Writing fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18.gif
[Sat Feb 18 08:15:59 2012] Mean detx,y = (231.06, 12945.69) 
[Sat Feb 18 08:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 08:16:09 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 08:16:09 2012] Setting source spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Feb 18 08:16:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Feb 18 09:42:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Feb 18 09:42:22 2012] rmf not generated due to insufficient counts
[Sat Feb 18 10:11:00 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:11:00 2012] Error reading totcts from fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Feb 18 10:11:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:11:04 2012] Using photon index=1.80, rate=0.029, arf fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src18.arf
[Sat Feb 18 10:11:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:11:04 2012] Updating source flux to 1.5e-12
[Sat Feb 18 10:16:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting