[Fri Feb 17 16:10:37 2012] Detection parameters:
  Position = (321.1, 498.9) = 5 34 29.28 22 13 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.7 +/- 24.9
  Background counts = 96.6
  Rate = 0.02 +/- 0.003

[Fri Feb 17 16:10:38 2012] Off-axis axis estimate = 14.63'
[Fri Feb 17 18:40:59 2012] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:40:59 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Fri Feb 17 18:40:59 2012] source mask rpix=3.2, npix_max = 53, mask sum = 63, frac = 1.176
[Fri Feb 17 18:40:59 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 13.74"
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54.csv
[Fri Feb 17 22:57:16 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Feb 17 22:57:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54.csv
[Fri Feb 17 22:57:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:18 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Feb 17 22:57:18 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Feb 17 22:57:18 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Fri Feb 17 22:57:38 2012] Source 14 is offset by 6.940186 and 5.297805 pixels which is larger than
2 X fitted extent = 1.649209 x 1.649209, not incorporating fit results
[Fri Feb 17 22:57:38 2012] Warning, spatial fit 54 centroid is now closest to src. 60
[Fri Feb 17 22:57:38 2012] Spatial fit model total counts = 1423.340000, observed total counts = 1647.000000
[Fri Feb 17 22:57:38 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Feb 17 22:57:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:38 2012] Assessing source extent using major
[Fri Feb 17 22:57:38 2012] Source does appear to be extended
[Fri Feb 17 22:57:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:38 2012] Source is confused with source 12
[Fri Feb 17 22:57:38 2012] Source is confused with source 13
[Sat Feb 18 02:30:30 2012] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 02:30:30 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Sat Feb 18 02:30:30 2012] source mask rpix=3.2, npix_max = 53, mask sum = 63, frac = 1.176
[Sat Feb 18 02:30:30 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 13.74"
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52.ximg exists
[Sat Feb 18 06:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52.csv
[Sat Feb 18 06:36:07 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Feb 18 06:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52.csv
[Sat Feb 18 06:36:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Feb 18 06:36:08 2012] fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Feb 18 06:36:08 2012] Fit fullrun_mos2_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sat Feb 18 06:36:27 2012] Source 14 is offset by 6.766599 and 5.330678 pixels which is larger than
2 X fitted extent = 1.613044 x 1.613044, not incorporating fit results
[Sat Feb 18 06:36:27 2012] Warning, spatial fit 52 centroid is now closest to src. 15
[Sat Feb 18 06:36:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:27 2012] Assessing source extent using major
[Sat Feb 18 06:36:27 2012] Source does appear to be extended
[Sat Feb 18 06:36:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 07:42:23 2012] XMMSAS src. selection expression = ellipse(27891.090149, 43358.335022, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 18 07:42:23 2012] Writing source region out to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14_src.reg
[Sat Feb 18 07:42:23 2012] Extracting stamp from image fullrun_mos2_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (284, 461) - (359, 536)
[Sat Feb 18 07:42:23 2012] XMMSAS bgd. selection expression = annulus(27891.090149, 43358.335022, 1087.500000, 2175.000000, X, Y) && !ellipse(28200.661255, 40639.869110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.549316, 41446.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.874291, 41996.703029, 2036.872059, 587.692201, 89.815390, X, Y) && !ellipse(28228.597473, 42321.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.968811, 40407.554047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.788818, 43989.167328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28234.810242, 43432.439545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.258453, 41448.604309, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 07:42:23 2012] Writing fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14.gif
[Sat Feb 18 08:29:54 2012] Mean detx,y = (139.99, 15886.41) 
[Sat Feb 18 08:29:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 08:30:12 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 08:30:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Feb 18 08:30:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Feb 18 10:09:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Feb 18 10:09:19 2012] rmf not generated due to insufficient counts
[Sat Feb 18 10:11:01 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:11:01 2012] Error reading totcts from fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Feb 18 10:11:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:11:05 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos2_xmm0412590701_pi300-10000_pass1_cl_src14.arf
[Sat Feb 18 10:11:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:11:05 2012] Getting flux using calc_pl_flux failed
[Sat Feb 18 10:16:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting