[Fri Feb 17 16:09:59 2012] Detection parameters:
  Position = (392.2, 301.8) = 5 34 7.07 21 59 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.1 +/- 23.0
  Background counts = 235.9
  Rate = 0.03 +/- 0.003

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 6.80'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Feb 17 16:12:47 2012] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.788
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.83"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Feb 17 18:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Feb 17 18:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Feb 17 18:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 3205.640000, observed total counts = 3363.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 7 = 3.210781 pixels
[Fri Feb 17 22:57:26 2012] Warning, changing simple spatial fit ID from 6 to 1
[Fri Feb 17 22:57:26 2012] 2915.104000 total counts/ 670.324000 bgd. counts: snr = 86.702456
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.210781 pixels
  Position = (394.3, 304.3) = 5 34 6.43 21 59 56.9
  Extent = 20.0 (20.0-20.0)", rotation angle = 0
  Source counts = 2244.8 +/- 54.0
  Background counts = 670.3
  Rate = 0.3 +/- 0.008
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 1
[Fri Feb 17 22:57:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 19.95"
[Fri Feb 17 22:57:47 2012] source mask rpix=4.6, npix_max = 103, mask sum = 81, frac = 0.783
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 19.95"
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6.csv
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6.csv
[Sat Feb 18 02:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Feb 18 02:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:16 2012] Warning, spatial fit 6 centroid is now closest to src. 1
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] Counts = 2244.780000, rescaling region sizes by 2.000000
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(34252.592400, 26425.014000, 2394.108069, 2394.108069, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (257, 167) - (532, 442)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(34252.592400, 26425.014000, 7980.360230, 15960.720459, X, Y) && !ellipse(34394.093231, 26837.016968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28363.854000, 34196.597000, 1239.080036, 1239.080036, 0.000000, X, Y) && !ellipse(33940.014191, 24579.347321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.339000, 34210.606000, 1612.392046, 1612.392046, 0.000000, X, Y) && !ellipse(34009.068848, 28866.590393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27965.354000, 34764.426000, 1664.192048, 1664.192048, 0.000000, X, Y) && !ellipse(30776.878662, 34087.562134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27826.816000, 34704.605800, 1107.232032, 1107.232032, 0.000000, X, Y) && !ellipse(25597.442200, 34279.985382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30109.630000, 34140.118000, 1670.184048, 1670.184048, 0.000000, X, Y) && !ellipse(27869.164800, 41437.064000, 2072.856060, 2072.856060, 0.000000, X, Y) && !ellipse(28380.653656, 40150.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.448608, 41639.710663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.741394, 40322.752411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.272186, 39616.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.498600, 39292.778000, 958.280028, 958.280028, 0.000000, X, Y) && !ellipse(27759.241394, 41967.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.271600, 42698.616000, 2181.576063, 433.568812, 105.830800, X, Y) && !ellipse(27110.020355, 39357.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y) && !ellipse(28318.271200, 36166.103600, 797.118423, 797.118423, 0.000000, X, Y) && !ellipse(27523.065800, 35966.244200, 966.192028, 966.192028, 0.000000, X, Y) && !ellipse(26901.433289, 34617.182068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.547058, 34551.894897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34297.354584, 28265.398834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34326.709600, 27676.570000, 1000.936029, 1000.936029, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7.gif
[Sat Feb 18 06:46:08 2012] Mean detx,y = (-411.97, 7566.49) 
[Sat Feb 18 06:46:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:50:42 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:50:42 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Feb 18 06:50:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Feb 18 10:10:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:56 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Feb 18 10:10:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:57 2012] Using photon index=1.80, rate=0.317, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src7.arf
[Sat Feb 18 10:10:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:57 2012] Updating source flux to 4.3e-12
[Sat Feb 18 10:11:07 2012] Flag c found in src. 7 procflags, skipping spectral fitting